This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
Some parameters need to be doubleword aligned due to the presence of the applet_resource_user_id.
Previously, this value was invalid in many commands where it was not doubleword aligned when popped.
The first u32 describes the vibration device type which is a Linear Resonant Actuator used in Nintendo Switch controller hardware.
The second u32 describes the vibration device position, in this case distinguishing between left and right vibration actuators.
Pro Controllers have 2 LRAs each that can vibrate independently of each other, which means they have 2 distinct vibration device handles to distinguish between the two actuators.
Similarly for joycons, the left joycon can be distinguished from the right joycon through the vibration device handle since each joycon has 1 LRA.
RestoreDefaults() now restores the selected devices' mappings using UpdateMappingWithDefaults().
This allows us to move the keyboard mapping from RestoreDefaults() to UpdateMappingWithDefaults().
Previously mouse clicks will not register when touch is disabled.
This rectifies that and allows mouse clicks to be mapped to other buttons if the touchscreen is disabled.
With this, the "Input Devices" combobox should accurately reflect the input device being used and disallows inputs from other input devices unless the input device is set to "Any".
This reduces the overhead of bounds checking on each element.
It won't reduce the cost of allocation because usually this vector's
capacity is usually large enough to hold whatever we push to it.
Changes QMessageBox usages to warnings, as the problems they bring to
light are being safely handled by the application and do not warrant
something of the "critical" level.
Changes LOG_CRITICAL to LOG_ERROR for the same reason. Preferring ERROR
to WARNING as yuzu is denying loading of any guest applications after
checking for these conditions.
Moved logging the GL_RENDERER string into GetUnsupportedGLExtensions()
to make more clear that unsupported extensions were already being
logged. Makes placement of the logs easier to understand later, as well.
Changes the first message to not include the OpenGL version, as the
error is caused by OpenGL failing to load.
Adds a new check for OpenGL version 4.3. This will display a message
with a similar error as well as the GL_RENDERER string. Adds a CRITICAL
log message when triggered. This prevents a crash with yuzu trying to
use older OpenGL versions.
Modifies the unsupported extension message to output the GL_RENDERER
string in the message, as well as logging the string.
Resolves numerous deprecation warnings throughout the codebase due to
inclusion of this header. Now building core should be significantly less
noisy (and also relying on less global state).
This also uncovered quite a few modules that were relying on indirect
includes, which have also been fixed.
The interrupt handler contains a std::atomic_bool, which isn't copyable
or movable, so the special move member functions will always be deleted,
despite being defaulted.
This can resolve warnings on clang and GCC.
Some games like Cave Story+ set invalid values in the ControllerPrivateArg's mode and caller fields.
Use other fields to determine the appropriate mode and caller should either or both fields be invalid.
- This works similiar to GetAlbumContentsFileListForApplication.
- Since we do not implement the album, this should be safe to stub for now.
- Used by Super Smash Bros. Ultimate (newer updates) in World of Light.
Hides all of the implementation details for users of the class. This has
the benefit of reducing includes and also making the fiber classes
movable again.
Unicorn long-since lost most of its use, due to dynarmic gaining support
for handling most instructions. At this point any further issues
encountered should be used to make dynarmic better.
This also allows us to remove our dependency on Python.
Allows our CI to catch more potential bugs. This also removes the
[[nodiscard]] attribute of IOFile's Open member function. There are
cases where a file may want to be opened, but have the status of it
checked at a later time.
It's deprecated in the language to autogenerate these if the destructor
for a type is specified, so we can explicitly specify how we want these
to be generated.
The API of VP9 exposes a WasFrameHidden() function which accesses this
member. Given the constructor previously didn't initialize this member,
it's a potential vector for an uninitialized read.
Instead, we can initialize this to a deterministic value to prevent that
from occurring.
* The web_service http request is now fixed on Windows (R) platform.
* The issue is due to a complicated race-condition in `httplib`, a detailed
explanation is available at https://github.com/yhirose/cpp-httplib/pull/701
* A pending Pull Request on `httplib` has been applied to remedy the
said race-condition.
* The socket availability check is removed due to a behavioral chice of
`httplib` that a socket will not be created before any actual request
is sent.
This implements texture cube arrays with shadow comparisons but doesn't
fix the asserts related to it.
Fixes out of bounds reads on swizzle constructors and makes them use
bounds checked ::at instead of the unsafe operator[].
Previous to this commit, the tests were using operator[] from
unordered_map to query elements but this silently inserts empty elements
when they don't exist. If all threads were executed without concurrency,
this wouldn't be an issue, but the same unordered_map could be written
from two threads at the same time. This is a data race and makes some
previously inserted elements invisible for a short period of time,
causing them to insert and return an empty element. This default
constructed element (a zero) was used to index an array of fibers that
asserted when one of them was nullptr, shutting the test session off.
To address this issue, lock on thread id reads and writes. This could be
a shared mutex to allow concurrent reads, but the definition of
std::this_thread::get_id is fuzzy when using non-standard techniques
like fibers. I opted to use a standard mutex.
While we are at it, fix the included headers.
* A regression was in 39c8d18 and token verification function was
broken.
* The reason being `httplib` now requires OpenSSL 1.1+ API while
LibreSSL 2.x provided OpenSSL 1.0 compatible API.
* The bundled LibreSSL has been updated to 3.2.2 so it now provides
OpenSSL 1.1 compatible API now.
* Also the path hint has been added so that it will find the correct
path to the CA certs on *nix systems.
* An option is provided so that *nix system distributions/providers can
use their own SSL implementations when compiling Yuzu/Citra to
(hopefully) complies with their maintenance guidelines.
* LURLParse is also removed since `httplib` can handle
`scheme:host:port` string itself now.
This commit aims to implement the NVDEC (Nvidia Decoder) functionality, with video frame decoding being handled by the FFmpeg library.
The process begins with Ioctl commands being sent to the NVDEC and VIC (Video Image Composer) emulated devices. These allocate the necessary GPU buffers for the frame data, along with providing information on the incoming video data. A Submit command then signals the GPU to process and decode the frame data.
To decode the frame, the respective codec's header must be manually composed from the information provided by NVDEC, then sent with the raw frame data to the ffmpeg library.
Currently, H264 and VP9 are supported, with VP9 having some minor artifacting issues related mainly to the reference frame composition in its uncompressed header.
Async GPU is not properly implemented at the moment.
Co-Authored-By: David <25727384+ogniK5377@users.noreply.github.com>
It turns out that after a controller is disconnected, there is a chance that events from the previous controller are sent/processed after it has been disconnected.
This causes the previously disconnected controller to reappear as connected due to GetSDLJoystickBySDLID() emplacing this controller back to the map.
Fix this by only returning an SDLJoystick if and only if it exists in the map.
These compiler flags aren't shared with clang, so specifying these flags
unconditionally can lead to a bit of warning spam.
While we're in the area, we can also enable -Wunused-but-set-parameter
given this is almost always a bug.
This emulates the behavior we get on GLSL with regular SSBOs with a
pointer + length pair. It aims to be consistent with the crashes we
might get.
Out of bounds stores are ignored. Atomics are ignored and return zero.
Reads return zero.
Previously, the lower bound wasn't being used and zero was being used as
the lower bound every time this function was called.
This affects the outcome of some of the randomized entries a little bit,
for example, the lower-bound for beard and mustache flags was supposed
to be 1, not 0.
Aside from these cases, the bug didn't affect anything else.
Previously, disconnecting a controller still leaves a null SDLJoystick entry within the vector of SDLJoysticks mapped by GUID.
When a DirectInput device of the same GUID is reconnected, it adds that device to a new port causing non-detectable input.
Furthermore, opening the "Configure" menu would cause yuzu to crash since it first tries to resolve the name of a null SDLJoystick entry that was not removed.
Resolve this by properly erasing the SDLJoystick entry from the vector.
Locks on GetCurrentHostThreadID were causing performance issues
according to Visual Studio's profiler. It was consuming twice the time
as arm_interface.Run(). The cost was not in the function itself but in
the lockinig it required.
Reimplement these functions using atomics and static storage instead of
an unordered_map. This is a side effect to avoid locking and using linked
lists for reads.
Replace unordered_map with a linear search.
Makes our error coverage a little more consistent across the board by
applying it to Linux side of things as well. This also makes it more
consistent with the warning settings in other libraries in the project.
This also updates httplib to 0.7.9, as there are several warning
cleanups made that allow us to enable several warnings as errors.
Vulkan has requirements for primitive topologies that don't play nicely
with yuzu's. Since it's only 4 bits, we can move it to fixed state
without changing the size of the pipeline key.
- Fixes a regression on recent Nvidia drivers on Fire Emblem: Three
Houses.
RDNA devices seem to crash when using VK_EXT_extended_dynamic_state in
the latest 20.9.2 proprietary Windows drivers. As a workaround, for now
we block device names corresponding to current RDNA released products.
TMML takes an array argument that has no known meaning, this one appears
as the first component in gpr8 followed by s, t and r. Skip this
component when arrays are being used. Also implement CUBE texture types.
- Used by Pikmin 3: Deluxe Demo.
The old code had a sort function that was invalid and it didn't work as
expected when the base vector had a different order (e.g. renderdoc was
attached).
This sorts devices as expected and fixes a debug assert on MSVC.
From -fsanitize=address, this code wasn't calling the proper destructor.
Adding virtual destructors for each inherited class and the base class
fixes this bug.
While we are at it, mark the functions as final.
Using the Qt::WindowStaysOnTopHint flag allows these dialogs to show up on top while running in fullscreen. However, if yuzu goes out of focus (by alt-tabbing or otherwise), this flag does not seem to have an effect.
The previous fix only partially solved the issue, as only certain GPUs that needed 9 or less MiB subtracted would work (i.e. GTX 980 Ti, GT 730). This takes from DXVK's example to divide `heap_size` by 2 to determine `allocable_size`. Additionally tested on my Quadro K4200, which previously required setting it to 12 to boot.
While were at it, we can also enable sign conversion warnings and other
common warnings as errors to prevent these from creeping back into the
codebase.
When HEADER_GENERATOR was included in the DEPENDS section of custom
commands, msbuild assumed this was always modified. Changing this file
is not common so we can remove it from there.
Allows some implementations to avoid completely zeroing out the internal
buffer of the optional, and instead only set the validity byte within
the structure.
This also makes it consistent how we return empty optionals.
This is used in multiple games such as:
- Clubhouse Games: 51 Worldwide Classics
- Grandia HD Collection
- XCOM 2 Collection
- Baldur's Gate 1/2
- Dr Kawashima's Brain Training
- Super Mario 3D All-Stars
This is a hack to destroy all HostCounter instances before the base
class destructor is called. The query cache should be redesigned to have
a proper ownership model instead of using shared pointers.
For now, destroy the host counter hierarchy from the derived class
destructor.
This reworks how host<->device synchronization works on the Vulkan
backend. Instead of "protecting" resources with a fence and signalling
these as free when the fence is known to be signalled by the host GPU,
use timeline semaphores.
Vulkan timeline semaphores allow use to work on a subset of D3D12
fences. As far as we are concerned, timeline semaphores are a value set
by the host or the device that can be waited by either of them.
Taking advantange of this, we can have a monolithically increasing
atomic value for each submission to the graphics queue. Instead of
protecting resources with a fence, we simply store the current logical
tick (the atomic value stored in CPU memory). When we want to know if a
resource is free, it can be compared to the current GPU tick.
This greatly simplifies resource management code and the free status of
resources should have less false negatives.
To workaround bugs in validation layers, when these are attached there's
a thread waiting for timeline semaphores.
The context menu was removed in Mjölnir Part 1 as part of the input rewrite as we were unaware of it's usage statistics.
However, as this was the only way to clear the inputs of individual buttons, this PR will re-add it back in.
Previously we assumed a submission package can only contain one Program NCA with a single TitleID.
However, Super Mario 3D All-Stars contains four Program NCAs, each with their unique TitleIDs.
This accounts for the existence of multi-content games such as this one.
- Fixes booting Super Mario 3D All-Stars from the games list.
In a lot of cases, we can make use of const references rather than
non-const references.
While we're in the area we can silence some truncation and sign
conversion warnings.
Now all that remains is:
18 instances in file_sys code
14 instances in GDB stub code (this can be tossed wholesale)
4 instances in HLE code
2 instances in settings code.
Previously this function was using ~16KB of stack (16528 bytes), which
was caused by the function arguments being taken by value rather than by
reference.
We can make this significantly lighter on the stack by taking them by
reference.
We make it explicit that we're truncating arithmetic here to resolve
compiler warnings (even if the sizes weren't u32/u64 arithmetic
generally promotes to int :<)
There have been reports of quite heavy input lag in the past.
Compared to Citra for example, our pad_update_ns value is very high.
So let's decrease it and see if it helps with this problem.
Now that the GPU is initialized when video backends are initialized,
it's no longer needed to query components once the game is running: it
can be done when yuzu is booting.
This allows us to pass components between constructors and in the
process remove all Core::System references in the video backend.
This allows toggling motion on or off, and allows access to the motion configuration.
Also changes the [waiting] text for motion buttons to Shake! as this is how motion is connected to a player.
- Some games like Shipped have a minimum requirement of 0 connected players and is undesired behavior. We must require a minimum of 1 player connected regardless of what games may ask.
Now left and right joycons have the same priority (meaning both needs to be supported by the game).
Explanation of the new heuristic:
Assign left joycons to even player indices and right joycons to odd player indices.
We do this since Captain Toad Treasure Tracker expects a left joycon for Player 1 and a right Joycon for Player 2 in 2 Player Assist mode.
'driver_id' can only be known on Vulkan 1.1 after creating a logical
device. Move the driver id check to disable
VK_EXT_extended_dynamic_state after the logical device is successfully
initialized.
The Vulkan device will have the extension enabled but it will not be
used.
I made a request on the Xbyak issue tracker to allow some constructors
to be constexpr in order to avoid static constructors from needing to
execute for some of our register constants.
This request was implemented, so this updates Xbyak so that we can make
use of it.
The main problem is the loss of compatibility with some controllers, but there are also
unwanted changes to the behaviour of PS4 controllers (hardcoded lightbar color).
Due to the way Qt performs destruction of parent/child widgets, we need
to make the lifetime of the input subsystem shared across the main
window and the render window.
The purpose of make_tuple is that you don't need to explicitly type out
the types of the things that comprise said tuple.
Given this just returns default values, we can simplify this a bit.
Vertex binding's <stride> is bugged on AMD's proprietary drivers when
using VK_EXT_extended_dynamic_state. Blacklist it for now while we
investigate how to report this issue to AMD.
Abstracts most of the input mechanisms under an InputSubsystem class
that is managed by the frontends, eliminating any static constructors
and destructors. This gets rid of global accessor functions and also
allows the frontends to have a more fine-grained control over the
lifecycle of the input subsystem.
This also makes it explicit which interfaces rely on the input subsystem
instead of making it opaque in the interface functions. All that remains
to migrate over is the factories, which can be done in a separate
change.
As reported by tsan, SelectThreads could write to
is_context_switch_pending holding a mutex while SwitchToCurrent reads it
without holding any.
It is assumed that the author didn't want an atomic here, so the code is
reordered so that whenever is_context_switch_pending is read inside
SwitchToContext, the mutex is locked.
As reported by tsan, host_thread_ids could be read while
any of the RegisterHostThread variants were called.
To fix this, lock the register mutex when yuzu is running in multicore
mode and GetCurrentHostThreadID is called.
The extended logging option is automatically disabled on boot but can be enabled afterwards, allowing the log file to go up to 1 GB during that session.
This commit also fixes a few errors that are present in the general debug menu.
Add the necessary CMake code to copy the contents in a string source
shader (GLSL or GLASM) to a header file then consumed by video_core
files.
This allows editting GLSL in its own files without having to maintain
them in source files.
For now, only OpenGL presentation shaders are moved, but we can add
GLASM presentation shaders and static SPIR-V generation through
glslangValidator in the future.
This is the only place it's actively used. It's also more appropriate
for web-related structures to be within the web service target.
Especially given this one doesn't rely on anything in the common
library.
State track the current primitive topology with a regular comparison
instead of using dirty flags.
This fixes a bug in dirty flags for this particular state and it also
avoids unnecessary state changes as this property is stored in a
frequently changed bit field.
Migrates a remaining common file over to the Common namespace, making it
consistent with the rest of common files.
This also allows for high-traffic FS related code to alias the
filesystem function namespace as
namespace FS = Common::FS;
for more concise typing.
These are intentionally discarded internally, since the rest of the
public API allows querying success. We want all non-internal uses of
these functions to be explicitly checked, so we can signify that we
intentionally want to discard the return values here.
We can simplify this function down into a single line with the use of
fmt. A benefit with the fmt approach is that the fmt variant of
localtime is thread-safe as well, making GetOsTimeZoneOffset()
thread-safe as well.
Creates a new entry in the Emulation menu called "Configure Current Game..." that is only available if a game is currently being executed in yuzu. When selected, it opens the game properties dialog for the current game.
Thanks to @BSoDGamingYT for reminding me to do this.
Now that clang-format makes [[nodiscard]] attributes format sensibly, we
can apply them to several functions within the common library to allow
the compiler to complain about any misuses of the functions.
We can query the given object name directly from the widget itself. This
removes any potential for forgetting to change the name if the widget
gets renamed and makes the API much simpler (just pass in the widget,
and not worry about its name).
This was assigning the field to itself, which is a no-op. The size
doesn't change between its initial assignment and this one, so this is a
safe change to make.
Allows the compiler to warn about cases where the constructor is used
but then immediately discarded, which is a potential cause of
locking/unlocking bugs.
Does not allocate more threads than available in the host system for boot-time shader compilation and always allocates at least 1 thread if hardware_concurrency() returns 0.
There were two issues with block linear copies. First the swizzling was
wrong and this commit reimplements them.
The other issue was that these copies are generally used to download
render targets from the GPU and yuzu was not downloading them from
host GPU memory unless the extreme GPU accuracy setting was selected.
This commit enables cached memory reads for all accuracy levels.
- Fixes level thumbnails in Super Mario Maker 2.
This makes it more inline with its currently unavailable standardized
analogue std::derived_from.
While we're at it, we can also make the template match the requirements
of the standardized variant as well.
Previously the constructor for all of these would run at program
startup, consuming time before the application can enter main().
This is also particularly dangerous, given the logging system wouldn't
have been initialized properly yet, yet the program would use the logs
to signify an error.
To rectify this, we can replace the literals with constexpr functions
that perform the conversion at compile-time, completely eliminating the
runtime cost of initializing these arrays.
- In `SetCurrentThreadName`, when on Linux, truncate to 15 bytes, as (at
least on glibc) `pthread_set_name_np` will otherwise return `ERANGE` and
do nothing.
- Also, add logging in case `pthread_set_name_np` returns an error
anyway. This is Linux-specific, as the Apple and BSD versions of
`pthread_set_name_np return `void`.
- Change the name for CPU threads in multi-core mode from
"yuzu:CoreCPUThread_N" (19 bytes) to "yuzu:CPUCore_N" (14 bytes) so it
fits into the Linux limit. Some other thread names are also cut off,
but I didn't bother addressing them as you can guess them from the
truncated versions. For a CPU thread, truncation means you can't see
which core it is!
On DragonFly and NetBSD build fails with
src/common/virtual_buffer.cpp
src/common/virtual_buffer.cpp:16:10: fatal error: sys/sysinfo.h: No such file or directory
#include <sys/sysinfo.h>
^~~~~~~~~~~~~~~
We can add a helper function to make creation of these files nicer.
While we're at it, we can eliminate an unnecessary std::array copy in
the constructor. This makes the overhead on some of these functions way
less intensive, given some arrays were quite large.
e.g. The timezone location names are 9633 bytes in size.
In some rare instances, the patch manager is not able to find a control nca, fallback to the previous method of parsing a control nca through the loader if this occurs.
Previously NAND/SDMC installed titles would open device saves when they are supposed to be user saves. This is due to the control nca not being read and thus returns 0 for both GetDefaultNormalSaveSize() and GetDeviceSaveDataSize(). Fix this by utilizing the patch manager to read the control nca.
Previously the map of entries was being cleared while looping through each game directory, this resulted into all game directories except the last game dir to lose content metadata information. Fix this by clearing the entries only once.
In a few places, the data to be set as the IV is already within an array.
We shouldn't require this data to be heap-allocated if it doesn't need
to be. This allows certain callers to reduce heap churn.
The general pattern is to mark mutexes as mutable when it comes to
matters of constness, given the mutex acts as a transient member of a
data structure.
I made a review comment about this in the PR that this was introduced
in (#3955, commit 71c4779211), but it
seems to have been missed.
We shouldn't be using this pragma here because it's MSVC specific. This
causes warnings on other compilers.
The test it's surrounding is *extremely* dubious, but for the sake of
silencing warnings on other compilers, we can mark "placebo" as volatile
and be on with it.
* ipc: Allow all trivially copyable objects to be passed directly into WriteBuffer
With the support of C++20, we can use concepts to deduce if a type is an STL container or not.
* More agressive concept for stl containers
* Add -fconcepts
* Move to common namespace
* Add Common::IsBaseOf
Oddly enough the scan that feeds the manual content provider is hardcoded to scan 2 nested directories deep.
This effectively rendered the scan subdirectories setting useless as the manual content provider cannot find any games located more than 2 nested directories deep.
Furthermore, this behavior causes game files to be picked up by the manual content provider even if scan subdirectories is disabled.
FIx this by utilizing the behavior described when populating the game list for populating the content provider.
Hides the following options when the title id is 0:
- Open Save Location
- Open Mod Data Location
- Open Transferable Shader Cache
- All removal options except Remove Custom Configuration
This implements: Socket, Poll, Accept, Bind, Connect, GetPeerName,
GetSockName, Listen, Fcntl, SetSockOpt, Shutdown, Recv, RecvFrom,
Send, SendTo, Write, and Close
The implementation was done referencing: SwIPC, switchbrew, testing
with libnx and inspecting its code, general information about bsd
sockets online, and analysing official software.
Not everything from these service calls is implemented, but everything
that is not implemented will be logged in some way.
This abstraction allows executing blocking functions (like recvfrom on a
socket configured for blocking) without blocking the service thread.
It is intended to be used with SleepClientThread.
Makes the interface future-proofed for supporting other platforms in the event we ever support platforms with differing pointer sizes. This way, we have a type in place that is always guaranteed to be able to represent a pointer exactly.
The puller register array is made up of u32s however the `NUM_REGS` value is the size in bytes, so switch it to avoid making the struct unnecessary large. Also fix a small typo in a comment.
Not using the return value of these functions are undeniably the source
of a bug. This way we allow compilers to loudly make any future misuses
evident.
src/core/network/network.cpp:112:28: error: use of undeclared identifier 'SHUT_RD'
constexpr int SD_RECEIVE = SHUT_RD;
^
src/core/network/network.cpp:113:25: error: use of undeclared identifier 'SHUT_WR'
constexpr int SD_SEND = SHUT_WR;
^
src/core/network/network.cpp:114:25: error: use of undeclared identifier 'SHUT_RDWR'
constexpr int SD_BOTH = SHUT_RDWR;
^
src/core/network/network.cpp:120:37: error: unknown type name 'in_addr'; did you mean 'in_addr_t'?
constexpr IPv4Address TranslateIPv4(in_addr addr) {
^~~~~~~
in_addr_t
/usr/include/netdb.h:66:20: note: 'in_addr_t' declared here
typedef __uint32_t in_addr_t;
^
src/core/network/network.cpp:121:27: error: member reference base type 'in_addr_t' (aka 'unsigned int') is not a structure or union
const u32 bytes = addr.s_addr;
~~~~^~~~~~~
src/core/network/network.cpp:121:15: error: variables defined in a constexpr function must be initialized
const u32 bytes = addr.s_addr;
^
src/core/network/network.cpp:126:10: error: incomplete result type 'sockaddr' in function definition
sockaddr TranslateFromSockAddrIn(SockAddrIn input) {
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:127:5: error: unknown type name 'sockaddr_in'; did you mean 'sockaddr'?
sockaddr_in result;
^~~~~~~~~~~
sockaddr
/usr/include/netdb.h:142:9: note: 'sockaddr' declared here
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:127:17: error: variable has incomplete type 'sockaddr'
sockaddr_in result;
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:131:29: error: use of undeclared identifier 'AF_INET'
result.sin_family = AF_INET;
^
src/core/network/network.cpp:135:29: error: use of undeclared identifier 'AF_INET'
result.sin_family = AF_INET;
^
src/core/network/network.cpp:139:23: error: use of undeclared identifier 'htons'
result.sin_port = htons(input.portno);
^
src/core/network/network.cpp:143:14: error: variable has incomplete type 'sockaddr'
sockaddr addr;
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:156:1: error: unknown type name 'linger'
linger MakeLinger(bool enable, u32 linger_value) {
^
src/core/network/network.cpp:157:5: error: unknown type name 'linger'
linger value;
^
src/core/network/network.cpp:185:16: error: use of undeclared identifier 'AF_INET'
return AF_INET;
^
src/core/network/network.cpp:195:16: error: use of undeclared identifier 'SOCK_STREAM'
return SOCK_STREAM;
^
src/core/network/network.cpp:197:16: error: use of undeclared identifier 'SOCK_DGRAM'
return SOCK_DGRAM;
^
src/core/network/network.cpp:207:16: error: use of undeclared identifier 'IPPROTO_TCP'
return IPPROTO_TCP;
^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
This picks a default directory and file name. If on Windows and save-as screenshot saving is enabled, it asks the user, first defaulting to the default screenshot path, and with a default filename in the format `[title_id]_[year-mt-dy_hr-mn-sc-msc].png`. Otherwise, or on Linux for now, it simply saves a file in that directory with that file name.
This adds two options to the General -> UI tab. The first disables picking a place to save the file. The second chooses a default directory for saving screenshots.
We can make use of emplace()'s return value to determine whether or not
we need to perform an increment.
emplace() performs no insertion if an element already exist, so this can
eliminate a find() call.
The way the configurations are set up, it is not trivial to do this. I'll leave it as is, but the API selection, and the background color and volume slider selectors are kind of not following the style.
I noticed some of the code could be reduced to just passing the function an int, since I was doing the same thing over and over. Also clang-formats configure_graphics
Sets up initial support for implementing colored tristate functions. These functions color a QWidget blue when it's overriding a global setting, and discolor it when not. The lack of color indicates it uses the global state, replacing the Qt::CheckState::PartiallyChecked state with the global state.
This commit adds a network abstraction designed to implement bsd:s but
at the same time work as a generic abstraction to implement any
networking code we have to use from core.
This is implemented on top of BSD sockets on Unix systems and winsock on
Windows. The code is designed around winsocks having compatibility
definitions to support both BSD and Windows sockets.
In file included from src/core/hle/kernel/memory/page_table.cpp:5:
src/./common/alignment.h:67:68: error: no member named 'align_val_t' in namespace 'std'
return static_cast<T*>(::operator new (n * sizeof(T), std::align_val_t{Align}));
~~~~~^
src/./common/alignment.h:71:51: error: no member named 'align_val_t' in namespace 'std'
::operator delete (p, n * sizeof(T), std::align_val_t{Align});
~~~~~^
NV_shader_buffer_{load,store} is a 2010 extension that allows GL applications
to use what in Vulkan is known as physical pointers, this is basically C
pointers. On GLASM these is exposed through the LOAD/STORE/ATOM
instructions.
Up until now, assembly shaders were using NV_shader_storage_buffer_object.
These work fine, but have a (probably unintended) limitation that forces
us to have the limit of a single stage for all shader stages. In contrast,
with NV_shader_buffer_{load,store} we can pass GPU addresses to the
shader through local parameters (GLASM equivalent uniform constants, or
push constants on Vulkan). Local parameters have the advantage of being
per stage, allowing us to generate code without worrying about binding
overlaps.
Previously, the method wasn't modifying any class state and therefore not having any effects when called.
Since this has been the case for a very long time now, I'm not sure if we couldn't just remove this method altogether.
Given the expression involves a 32-bit value, this simplifies down to
just: 0x3ffffff. This is likely a remnant from testing that was never
cleaned up.
Resolves a -Wshift-overflow warning.
The purpose of make_pair is generally to deduce the types within the
pair without explicitly specifying the types, so these usages were
generally unnecessary, particularly when the type is enforced by the
array declaration.
If subdirectories exist in the given path parameter and don't exist in the real filesystem create them prior to creating the files within.
This fixes the softlocks upon save creation in The Legend of Zelda: Breath of the Wild
These aren't directly important or commonly used within the process, so
we can move these to the bottom to allow everything else to be more
likely to be within a cache line.
In all usages of LogSetting(), string literals are provided.
std::string_view is better suited here, as we won't churn a bunch of
string allocations every time the settings are logged out.
While we're at it, we can fold LogSetting() into LogSettings(), given
it's only ever used there.
- This checks for and removes old updates or dlc based on title id. If a content meta nca exists within the registered cache, it will attempt to remove all the ncas associated with the content meta before installing a new update/dlc
Another error that got pass me and only noticed when I was doing the per-game settings UI rework. This prevents asynchronous GPU emulation from being disabled while multi core is enabled as a result of a poorly put together per-game config.
This is likely an oversight during a rebase. Guards use_multi_core to be only set when the global value is in use. It should not make a difference given the current code base, but makes the code sensible.
Profiling shows that this is a highly contested mutex, causing dimishing
results compared to a OS lock. std::mutex implementations can spin for a
while before falling back to an OS lock.
This avoids wasting precious CPU cycles in a no-op.
When zero byte files are present, the key (offset) for that file is identical to the file right after. A std::map isn't able to fit key-value pairs with identical keys (offsets), therefore, the solution is to use std::multimap which permits multiple entries with the same key.
This most prominently fixes Pokemon Sword and Shield weather with any RomFS mod applied.
In cases where the size is not a known constant when inlining, AlignUp<std::size_t> currently generates two 64-bit div instructions.
This generates one div and a cmov which is significantly cheaper.
Provides the buildbot with one builder that is always tracking the
latest version of the C++ standard, allowing us to progressively rectify
our code and amend any differences between standards over time instead
of waiting for a complete standard change, potentially breaking a lot of
code all at once.
Change GOB sizes from free-functions to constexpr constants.
Add SwizzleSliceToVoxel, a function that swizzles a 2D array of pixels
into a 3D texture and use it for 3D copies.
The file wasn't closed prior to being renamed / moved, throwing an error that states "The process cannot access the file because it is being used by another process." Fix this by closing the file prior to a rename / move operation.
Fixes saving in Luigi's Mansion 3 and KATANA KAMI: A Way of the Samurai Story.
Key issues fixed:
- Progress dialog showing up as white/hanging/getting stuck/unresponsive.
Key changes:
- Progress dialog now shows progress as a function of all files instead of per nca within a file.
- Overwrite existing files will overwrite all files in the selection.
We should not be limited by the SDMC's partition size, set this to 1 TiB. Hardware is limited to the max allowed by the MBR partition table which is 2 TiB.
Sets the total space of user and system partitions to their hardware defaults.
Furthermore, return the total space as free space for the user partition to prevent it from reaching zero.
Some games like Bioshock 2 check for the available free space prior to save creation, and we should not be limited by arbitrary limits.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
This is a new attempt at #4206 that shouldn't break windows builds.
If someone else could test on windows, it would be much appreciated.
Previously, the build bot passed but the actual builds failed.
In file included from src/input_common/gcadapter/gc_adapter.cpp:8:
src/./input_common/gcadapter/gc_adapter.h:11:10: fatal error: 'libusb.h' file not found
#include <libusb.h>
^~~~~~~~~~
In file included from src/input_common/gcadapter/gc_adapter.cpp:8:
src/./input_common/gcadapter/gc_adapter.h:77:10: error: no template named 'unordered_map' in namespace 'std'
std::unordered_map<int, bool> buttons;
~~~~~^
src/./input_common/gcadapter/gc_adapter.h:78:10: error: no template named 'unordered_map' in namespace 'std'
std::unordered_map<int, u16> axes;
~~~~~^
Stub this by sending 1 layer id instead of 2 as yuzu does not support multiple layers per display.
No adverse side effects have been observed.
- Used by Animal Crossing: New Horizons Update 1.3.0
This fixes some cases where entries could have been removed multiple
times reading freed memory. To address this issue this commit removes
duplicates from entries marked for removal and sorts out the removal
process to fix another use-after-free situation.
Another issue fixed in this commit is orphan invalidation cache entries.
Previously only the entries that were invalidated in the current
operations had its entries removed. This led to more use-after-free
situations when these entries were actually invalidated but referenced
an object that didn't exist.
