play/zephyr/ports/asf/sam3s/svd/ATSAM3S1C.svd

64310 lines
2.3 MiB

<?xml version="1.0" encoding="UTF-8"?>
<!-- ============================================================================ -->
<!-- Atmel Microcontroller Software Support -->
<!-- SAM Software Package License -->
<!-- ============================================================================ -->
<!-- Copyright (c) %copyright_year%, Atmel Corporation -->
<!-- -->
<!-- All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following condition is met: -->
<!-- -->
<!-- - Redistributions of source code must retain the above copyright notice, -->
<!-- this list of conditions and the disclaimer below. -->
<!-- -->
<!-- Atmel's name may not be used to endorse or promote products derived from -->
<!-- this software without specific prior written permission. -->
<!-- -->
<!-- DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR -->
<!-- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE -->
<!-- DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, -->
<!-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -->
<!-- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, -->
<!-- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -->
<!-- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -->
<!-- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -->
<!-- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<!-- ============================================================================ -->
<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.1" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
<vendor>Atmel</vendor>
<name>ATSAM3S1C</name>
<series>SAM3S</series>
<version>0</version>
<description>Atmel ATSAM3S1C Microcontroller</description>
<cpu>
<name>CM3</name>
<revision>r2p0</revision>
<endian>selectable</endian>
<mpuPresent>true</mpuPresent>
<fpuPresent>false</fpuPresent>
<nvicPrioBits>4</nvicPrioBits>
<vendorSystickConfig>false</vendorSystickConfig>
</cpu>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
<peripherals>
<peripheral>
<name>HSMCI</name>
<version>6449K</version>
<description>High Speed MultiMedia Card Interface</description>
<prependToName>HSMCI_</prependToName>
<baseAddress>0x40000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HSMCI</name>
<value>18</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MCIEN</name>
<description>Multi-Media Interface Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCIDIS</name>
<description>Multi-Media Interface Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSEN</name>
<description>Power Save Mode Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSDIS</name>
<description>Power Save Mode Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLKDIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PWSDIV</name>
<description>Power Saving Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RDPROOF</name>
<description>Read Proof Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRPROOF</name>
<description>Write Proof Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FBYTE</name>
<description>Force Byte Transfer</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PADV</name>
<description>Padding Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDCMODE</name>
<description>PDC-oriented Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTOR</name>
<description>Data Timeout Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTOCYC</name>
<description>Data Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTOMUL</name>
<description>Data Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>DTOCYC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>DTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>DTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>DTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>DTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>DTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>DTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>DTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SDCR</name>
<description>SD/SDIO Card Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDCSEL</name>
<description>SDCard/SDIO Slot</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SLOTA</name>
<description>Slot A is selected.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTB</name>
<description>-</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTC</name>
<description>-</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTD</name>
<description>-</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDCBUS</name>
<description>SDCard/SDIO Bus Width</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>1 bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 bit</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 bit</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ARGR</name>
<description>Argument Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARG</name>
<description>Command Argument</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMDR</name>
<description>Command Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDNB</name>
<description>Command Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSPTYP</name>
<description>Response Type</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORESP</name>
<description>No response.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>48_BIT</name>
<description>48-bit response.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>136_BIT</name>
<description>136-bit response.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>R1B</name>
<description>R1b response type</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPCMD</name>
<description>Special Command</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not a special CMD.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INIT</name>
<description>Initialization CMD: 74 clock cycles for initialization sequence.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CE_ATA</name>
<description>CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line.</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_CMD</name>
<description>Interrupt command: Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_RESP</name>
<description>Interrupt response: Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BOR</name>
<description>Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly.</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>EBO</name>
<description>End Boot Operation. This command allows the host processor to terminate the boot operation mode.</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OPDCMD</name>
<description>Open Drain Command</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PUSHPULL</name>
<description>Push pull command.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>OPENDRAIN</name>
<description>Open drain command.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXLAT</name>
<description>Max Latency for Command to Response</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>5</name>
<description>5-cycle max latency.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64-cycle max latency.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRCMD</name>
<description>Transfer Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_DATA</name>
<description>No data transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>START_DATA</name>
<description>Start data transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP_DATA</name>
<description>Stop data transfer</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRDIR</name>
<description>Transfer Direction</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>WRITE</name>
<description>Write.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>READ</name>
<description>Read.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRTYP</name>
<description>Transfer Type</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>SINGLE</name>
<description>MMC/SD Card Single Block</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>MMC/SD Card Multiple Block</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STREAM</name>
<description>MMC Stream</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BYTE</name>
<description>SDIO Byte</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BLOCK</name>
<description>SDIO Block</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IOSPCMD</name>
<description>SDIO Special Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not an SDIO Special Command</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SDIO Suspend Command</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>SDIO Resume Command</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ATACS</name>
<description>ATA with Command Completion Signal</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal operation mode.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COMPLETION</name>
<description>This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR).</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOT_ACK</name>
<description>Boot Operation Acknowledge.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BLKR</name>
<description>Block Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BCNT</name>
<description>MMC/SDIO Block Count - SDIO Byte Count</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BLKLEN</name>
<description>Data Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CSTOR</name>
<description>Completion Signal Timeout Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSTOCYC</name>
<description>Completion Signal Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSTOMUL</name>
<description>Completion Signal Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>CSTOCYC x 1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>CSTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>CSTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>CSTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>CSTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>CSTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>CSTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>CSTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>RSPR[%s]</name>
<description>Response Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RSP</name>
<description>Response</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data to Read</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DATA</name>
<description>Data to Write</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000C0E5</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>HSMCI Not Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX Buffer</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX Buffer</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOIRQA</name>
<description>SDIO Interrupt for Slot A</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>CE-ATA Completion Signal Received</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOIRQA</name>
<description>SDIO Interrupt for Slot A Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Timeout Error Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOIRQA</name>
<description>SDIO Interrupt for Slot A Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal received interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time out Error Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOIRQA</name>
<description>SDIO Interrupt for Slot A Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO Empty Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CFG</name>
<description>Configuration Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIFOMODE</name>
<description>HSMCI Internal FIFO control mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FERRCTRL</name>
<description>Flow Error flag reset control mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HSMODE</name>
<description>High Speed Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LSYNC</name>
<description>Synchronize on the last block</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>WP_EN</name>
<description>Write Protection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WP_KEY</name>
<description>Write Protection Key password</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>WP_VS</name>
<description>Write Protection Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No Write Protection Violation occurred since the last read of this register (WP_SR)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WRITE</name>
<description>Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Software reset had been performed while Write Protection was enabled (since the last read).</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WP_VSRC</name>
<description>Write Protection Violation SouRCe</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>256</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-255</dimIndex>
<name>FIFO[%s]</name>
<description>FIFO Memory Aperture0</description>
<addressOffset>0x00000200</addressOffset>
<size>32</size>
<access>read-write</access>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SSC</name>
<version>6078M</version>
<description>Synchronous Serial Controller</description>
<prependToName>SSC_</prependToName>
<baseAddress>0x40004000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SSC</name>
<value>22</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receive Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmit Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR</name>
<description>Clock Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCMR</name>
<description>Receive Clock Mode Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Receive Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Receive Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None, RK pin is an input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock, RK pin is an output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Receive Clock only during data transfers, RK pin is an output</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Receive Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Receive Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN_RF_LOW</name>
<description>Receive Clock enabled only if RF Low</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>EN_RF_HIGH</name>
<description>Receive Clock enabled only if RF High</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Receive Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSMIT</name>
<description>Transmit start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LOW</name>
<description>Detection of a low level on RF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_HIGH</name>
<description>Detection of a high level on RF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_FALLING</name>
<description>Detection of a falling edge on RF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_RISING</name>
<description>Detection of a rising edge on RF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LEVEL</name>
<description>Detection of any level change on RF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_EDGE</name>
<description>Detection of any edge on RF signal</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CMP_0</name>
<description>Compare 0</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STOP</name>
<description>Receive Stop Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STTDLY</name>
<description>Receive Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Receive Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RFMR</name>
<description>Receive Frame Mode Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOOP</name>
<description>Loop Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per Frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Receive Frame Sync Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Receive Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None, RF pin is an input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse, RF pin is an output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse, RF pin is an output</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer, RF pin is an output</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer, RF pin is an output</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer, RF pin is an output</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCMR</name>
<description>Transmit Clock Mode Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Transmit Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Transmit Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None, TK pin is an input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Transmit Clock, TK pin is an output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transmit Clock only during data transfers, TK pin is an output</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Transmit Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Transmit Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN_TF_LOW</name>
<description>Transmit Clock enabled only if TF Low</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>EN_TF_HIGH</name>
<description>Transmit Clock enabled only if TF High</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Transmit Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RECEIVE</name>
<description>Receive start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_LOW</name>
<description>Detection of a low level on TF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_HIGH</name>
<description>Detection of a high level on TF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_FALLING</name>
<description>Detection of a falling edge on TF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_RISING</name>
<description>Detection of a rising edge on TF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_LEVEL</name>
<description>Detection of any level change on TF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>TF_EDGE</name>
<description>Detection of any edge on TF signal</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STTDLY</name>
<description>Transmit Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Transmit Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TFMR</name>
<description>Transmit Frame Mode Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATDEF</name>
<description>Data Default Value</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Transmit Frame Sync Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Transmit Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None, RF pin is an input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse, RF pin is an output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse, RF pin is an output</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSDEN</name>
<description>Frame Sync Data Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDAT</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TDAT</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RSHR</name>
<description>Receive Sync. Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RSDAT</name>
<description>Receive Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TSHR</name>
<description>Transmit Sync. Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSDAT</name>
<description>Transmit Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0R</name>
<description>Receive Compare 0 Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP0</name>
<description>Receive Compare Data 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1R</name>
<description>Receive Compare 1 Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP1</name>
<description>Receive Compare Data 1</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000CC</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Transmit Sync</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Receive Sync</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0.</description>
<value>0x535343</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SPI</name>
<version>6088W</version>
<description>Serial Peripheral Interface</description>
<prependToName>SPI_</prependToName>
<baseAddress>0x40008000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SPI</name>
<value>21</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SPIEN</name>
<description>SPI Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SPIDIS</name>
<description>SPI Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>SPI Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MSTR</name>
<description>Master/Slave Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Peripheral Select</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCSDEC</name>
<description>Chip Select Decode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODFDIS</name>
<description>Mode Fault Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRBT</name>
<description>Wait Data Read Before Transfer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LLB</name>
<description>Local Loopback Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCS</name>
<description>Delay Between Chip Selects</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RD</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TD</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000F0</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>Transmit Data Register Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX buffer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX buffer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNDES</name>
<description>Underrun Error Status (Slave Mode Only)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SPIENS</name>
<description>SPI Enable Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNDES</name>
<description>Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNDES</name>
<description>Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNDES</name>
<description>Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>CSR[%s]</name>
<description>Chip Select Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCPHA</name>
<description>Clock Phase</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSNAAT</name>
<description>Chip Select Not Active After Transfer (Ignored if CSAAT = 1)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSAAT</name>
<description>Chip Select Active After Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BITS</name>
<description>Bits Per Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>8 bits for transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 bits for transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10_BIT</name>
<description>10 bits for transfer</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>11_BIT</name>
<description>11 bits for transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>12_BIT</name>
<description>12 bits for transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>13_BIT</name>
<description>13 bits for transfer</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>14_BIT</name>
<description>14 bits for transfer</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>15_BIT</name>
<description>15 bits for transfer</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BIT</name>
<description>16 bits for transfer</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCBR</name>
<description>Serial Clock Baud Rate</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBS</name>
<description>Delay Before SPCK</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCT</name>
<description>Delay Between Consecutive Transfers</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Control Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect Key</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0.</description>
<value>0x535049</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protection Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protection Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC0</name>
<version>6082R</version>
<description>Timer Counter 0</description>
<groupName>TC</groupName>
<prependToName>TC0_</prependToName>
<baseAddress>0x40010000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TC0</name>
<value>23</value>
</interrupt>
<interrupt>
<name>TC1</name>
<value>24</value>
</interrupt>
<interrupt>
<name>TC2</name>
<value>25</value>
</interrupt>
<registers>
<register>
<name>CCR0</name>
<description>Channel Control Register (channel = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>Channel Mode Register (channel = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR0_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 0)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR0</name>
<description>Stepper Motor Mode Register (channel = 0)</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV0</name>
<description>Counter Value (channel = 0)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA0</name>
<description>Register A (channel = 0)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB0</name>
<description>Register B (channel = 0)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0</name>
<description>Register C (channel = 0)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR0</name>
<description>Status Register (channel = 0)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER0</name>
<description>Interrupt Enable Register (channel = 0)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR0</name>
<description>Interrupt Disable Register (channel = 0)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR0</name>
<description>Interrupt Mask Register (channel = 0)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<description>Channel Control Register (channel = 1)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>Channel Mode Register (channel = 1)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR1_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 1)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR1</name>
<description>Stepper Motor Mode Register (channel = 1)</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV1</name>
<description>Counter Value (channel = 1)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA1</name>
<description>Register A (channel = 1)</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB1</name>
<description>Register B (channel = 1)</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1</name>
<description>Register C (channel = 1)</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR1</name>
<description>Status Register (channel = 1)</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER1</name>
<description>Interrupt Enable Register (channel = 1)</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR1</name>
<description>Interrupt Disable Register (channel = 1)</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR1</name>
<description>Interrupt Mask Register (channel = 1)</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<description>Channel Control Register (channel = 2)</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>Channel Mode Register (channel = 2)</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR2_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 2)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR2</name>
<description>Stepper Motor Mode Register (channel = 2)</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV2</name>
<description>Counter Value (channel = 2)</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA2</name>
<description>Register A (channel = 2)</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB2</name>
<description>Register B (channel = 2)</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC2</name>
<description>Register C (channel = 2)</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR2</name>
<description>Status Register (channel = 2)</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER2</name>
<description>Interrupt Enable Register (channel = 2)</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR2</name>
<description>Interrupt Disable Register (channel = 2)</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR2</name>
<description>Interrupt Mask Register (channel = 2)</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BCR</name>
<description>Block Control Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYNC</name>
<description>Synchro Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BMR</name>
<description>Block Mode Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TC0XC0S</name>
<description>External Clock Signal 0 Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC0: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA1</name>
<description>Signal connected to XC0: TIOA1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC0: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC1XC1S</name>
<description>External Clock Signal 1 Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC1: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA0</name>
<description>Signal connected to XC1: TIOA0</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC1: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC2XC2S</name>
<description>External Clock Signal 2 Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC2: TCLK2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA1</name>
<description>Signal connected to XC2: TIOA1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC2: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>QDEN</name>
<description>Quadrature Decoder ENabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>POSEN</name>
<description>POSition ENabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SPEEDEN</name>
<description>SPEED ENabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>QDTRANS</name>
<description>Quadrature Decoding TRANSparent</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EDGPHA</name>
<description>EDGe on PHA count mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVA</name>
<description>INVerted phA</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVB</name>
<description>INVerted phB</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVIDX</name>
<description>INVerted InDeX</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWAP</name>
<description>SWAP PHA and PHB</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IDXPHB</name>
<description>InDeX pin is PHB pin</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAXFILT</name>
<description>MAXimum FILTer</description>
<bitOffset>20</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>QIER</name>
<description>QDEC Interrupt Enable Register</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>QIDR</name>
<description>QDEC Interrupt Disable Register</description>
<addressOffset>0x000000CC</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>QIMR</name>
<description>QDEC Interrupt Mask Register</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>QISR</name>
<description>QDEC Interrupt Status Register</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIR</name>
<description>DIRection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FMR</name>
<description>Fault Mode Register</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENCF0</name>
<description>ENable Compare Fault Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENCF1</name>
<description>ENable Compare Fault Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0.</description>
<value>0x54494D</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC1</name>
<version>6082R</version>
<description>Timer Counter 1</description>
<groupName>TC</groupName>
<prependToName>TC1_</prependToName>
<baseAddress>0x40014000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TC3</name>
<value>26</value>
</interrupt>
<interrupt>
<name>TC4</name>
<value>27</value>
</interrupt>
<interrupt>
<name>TC5</name>
<value>28</value>
</interrupt>
<registers>
<register>
<name>CCR0</name>
<description>Channel Control Register (channel = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>Channel Mode Register (channel = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR0_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 0)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR0</name>
<description>Stepper Motor Mode Register (channel = 0)</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV0</name>
<description>Counter Value (channel = 0)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA0</name>
<description>Register A (channel = 0)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB0</name>
<description>Register B (channel = 0)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0</name>
<description>Register C (channel = 0)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR0</name>
<description>Status Register (channel = 0)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER0</name>
<description>Interrupt Enable Register (channel = 0)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR0</name>
<description>Interrupt Disable Register (channel = 0)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR0</name>
<description>Interrupt Mask Register (channel = 0)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<description>Channel Control Register (channel = 1)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>Channel Mode Register (channel = 1)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR1_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 1)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR1</name>
<description>Stepper Motor Mode Register (channel = 1)</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV1</name>
<description>Counter Value (channel = 1)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA1</name>
<description>Register A (channel = 1)</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB1</name>
<description>Register B (channel = 1)</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1</name>
<description>Register C (channel = 1)</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR1</name>
<description>Status Register (channel = 1)</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER1</name>
<description>Interrupt Enable Register (channel = 1)</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR1</name>
<description>Interrupt Disable Register (channel = 1)</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR1</name>
<description>Interrupt Mask Register (channel = 1)</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<description>Channel Control Register (channel = 2)</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>Channel Mode Register (channel = 2)</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Edge Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Edge Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR2_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 2)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<description>Waveform Mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR2</name>
<description>Stepper Motor Mode Register (channel = 2)</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN</name>
<description>Gray Count Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN</name>
<description>DOWN Count</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CV2</name>
<description>Counter Value (channel = 2)</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA2</name>
<description>Register A (channel = 2)</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB2</name>
<description>Register B (channel = 2)</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC2</name>
<description>Register C (channel = 2)</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR2</name>
<description>Status Register (channel = 2)</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER2</name>
<description>Interrupt Enable Register (channel = 2)</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR2</name>
<description>Interrupt Disable Register (channel = 2)</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR2</name>
<description>Interrupt Mask Register (channel = 2)</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BCR</name>
<description>Block Control Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYNC</name>
<description>Synchro Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BMR</name>
<description>Block Mode Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TC0XC0S</name>
<description>External Clock Signal 0 Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC0: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA1</name>
<description>Signal connected to XC0: TIOA1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC0: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC1XC1S</name>
<description>External Clock Signal 1 Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC1: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA0</name>
<description>Signal connected to XC1: TIOA0</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC1: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC2XC2S</name>
<description>External Clock Signal 2 Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC2: TCLK2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA1</name>
<description>Signal connected to XC2: TIOA1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIOA2</name>
<description>Signal connected to XC2: TIOA2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>QDEN</name>
<description>Quadrature Decoder ENabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>POSEN</name>
<description>POSition ENabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SPEEDEN</name>
<description>SPEED ENabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>QDTRANS</name>
<description>Quadrature Decoding TRANSparent</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EDGPHA</name>
<description>EDGe on PHA count mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVA</name>
<description>INVerted phA</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVB</name>
<description>INVerted phB</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVIDX</name>
<description>INVerted InDeX</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SWAP</name>
<description>SWAP PHA and PHB</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IDXPHB</name>
<description>InDeX pin is PHB pin</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAXFILT</name>
<description>MAXimum FILTer</description>
<bitOffset>20</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>QIER</name>
<description>QDEC Interrupt Enable Register</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>QIDR</name>
<description>QDEC Interrupt Disable Register</description>
<addressOffset>0x000000CC</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>QIMR</name>
<description>QDEC Interrupt Mask Register</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>QISR</name>
<description>QDEC Interrupt Status Register</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDX</name>
<description>InDeX</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIRCHG</name>
<description>DIRection CHanGe</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>QERR</name>
<description>Quadrature ERRor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIR</name>
<description>DIRection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FMR</name>
<description>Fault Mode Register</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENCF0</name>
<description>ENable Compare Fault Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENCF1</name>
<description>ENable Compare Fault Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0.</description>
<value>0x54494D</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TWI0</name>
<version>6212O</version>
<description>Two-wire Interface 0</description>
<groupName>TWI</groupName>
<prependToName>TWI0_</prependToName>
<baseAddress>0x40018000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TWI0</name>
<value>19</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>START</name>
<description>Send a START Condition</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STOP</name>
<description>Send a STOP Condition</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSEN</name>
<description>TWI Master Mode Enabled</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSDIS</name>
<description>TWI Master Mode Disabled</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVEN</name>
<description>TWI Slave Mode Enabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVDIS</name>
<description>TWI Slave Mode Disabled</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QUICK</name>
<description>SMBUS Quick Command</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MMR</name>
<description>Master Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADRSZ</name>
<description>Internal Device Address Size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No internal device address</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_BYTE</name>
<description>One-byte internal device address</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BYTE</name>
<description>Two-byte internal device address</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3_BYTE</name>
<description>Three-byte internal device address</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MREAD</name>
<description>Master Read Direction</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DADR</name>
<description>Device Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SMR</name>
<description>Slave Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADR</name>
<description>Slave Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IADR</name>
<description>Internal Address Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADR</name>
<description>Internal Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CWGR</name>
<description>Clock Waveform Generator Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLDIV</name>
<description>Clock Low Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHDIV</name>
<description>Clock High Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKDIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000F009</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed (automatically set / reset)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready (automatically set / reset)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready (automatically set / reset)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVREAD</name>
<description>Slave Read (automatically set / reset)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access (automatically set / reset)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access (clear on read)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error (clear on read)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledged (clear on read)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost (clear on read)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCLWS</name>
<description>Clock Wait State (automatically set / reset)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access (clear on read)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX buffer</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX buffer</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDATA</name>
<description>Master or Slave Receive Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDATA</name>
<description>Master or Slave Transmit Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TWI1</name>
<version>6212O</version>
<description>Two-wire Interface 1</description>
<groupName>TWI</groupName>
<prependToName>TWI1_</prependToName>
<baseAddress>0x4001C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TWI1</name>
<value>20</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>START</name>
<description>Send a START Condition</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STOP</name>
<description>Send a STOP Condition</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSEN</name>
<description>TWI Master Mode Enabled</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSDIS</name>
<description>TWI Master Mode Disabled</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVEN</name>
<description>TWI Slave Mode Enabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVDIS</name>
<description>TWI Slave Mode Disabled</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QUICK</name>
<description>SMBUS Quick Command</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MMR</name>
<description>Master Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADRSZ</name>
<description>Internal Device Address Size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No internal device address</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_BYTE</name>
<description>One-byte internal device address</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BYTE</name>
<description>Two-byte internal device address</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3_BYTE</name>
<description>Three-byte internal device address</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MREAD</name>
<description>Master Read Direction</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DADR</name>
<description>Device Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SMR</name>
<description>Slave Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADR</name>
<description>Slave Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IADR</name>
<description>Internal Address Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADR</name>
<description>Internal Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CWGR</name>
<description>Clock Waveform Generator Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLDIV</name>
<description>Clock Low Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHDIV</name>
<description>Clock High Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKDIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000F009</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed (automatically set / reset)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready (automatically set / reset)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready (automatically set / reset)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVREAD</name>
<description>Slave Read (automatically set / reset)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access (automatically set / reset)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access (clear on read)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error (clear on read)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledged (clear on read)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost (clear on read)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCLWS</name>
<description>Clock Wait State (automatically set / reset)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access (clear on read)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX buffer</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX buffer</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDATA</name>
<description>Master or Slave Receive Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDATA</name>
<description>Master or Slave Transmit Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PWM</name>
<version>6343J</version>
<description>Pulse Width Modulation Controller</description>
<prependToName>PWM_</prependToName>
<baseAddress>0x40020000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PWM</name>
<value>31</value>
</interrupt>
<registers>
<register>
<name>CLK</name>
<description>PWM Clock Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIVA</name>
<description>CLKA, CLKB Divide Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PREA</name>
<description>CLKA, CLKB Source Clock Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIVB</name>
<description>CLKA, CLKB Divide Factor</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PREB</name>
<description>CLKA, CLKB Source Clock Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ENA</name>
<description>PWM Enable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DIS</name>
<description>PWM Disable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>PWM Status Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER1</name>
<description>PWM Interrupt Enable Register 1</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Counter Event on Channel 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Counter Event on Channel 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Counter Event on Channel 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Counter Event on Channel 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID0</name>
<description>Fault Protection Trigger on Channel 0 Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID1</name>
<description>Fault Protection Trigger on Channel 1 Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID2</name>
<description>Fault Protection Trigger on Channel 2 Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID3</name>
<description>Fault Protection Trigger on Channel 3 Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR1</name>
<description>PWM Interrupt Disable Register 1</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Counter Event on Channel 0 Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Counter Event on Channel 1 Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Counter Event on Channel 2 Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Counter Event on Channel 3 Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID0</name>
<description>Fault Protection Trigger on Channel 0 Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID1</name>
<description>Fault Protection Trigger on Channel 1 Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID2</name>
<description>Fault Protection Trigger on Channel 2 Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCHID3</name>
<description>Fault Protection Trigger on Channel 3 Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR1</name>
<description>PWM Interrupt Mask Register 1</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Counter Event on Channel 0 Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Counter Event on Channel 1 Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Counter Event on Channel 2 Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Counter Event on Channel 3 Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID0</name>
<description>Fault Protection Trigger on Channel 0 Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID1</name>
<description>Fault Protection Trigger on Channel 1 Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID2</name>
<description>Fault Protection Trigger on Channel 2 Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID3</name>
<description>Fault Protection Trigger on Channel 3 Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR1</name>
<description>PWM Interrupt Status Register 1</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Counter Event on Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Counter Event on Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Counter Event on Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Counter Event on Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID0</name>
<description>Fault Protection Trigger on Channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID1</name>
<description>Fault Protection Trigger on Channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID2</name>
<description>Fault Protection Trigger on Channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCHID3</name>
<description>Fault Protection Trigger on Channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCM</name>
<description>PWM Sync Channels Mode Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYNC0</name>
<description>Synchronous Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC1</name>
<description>Synchronous Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC2</name>
<description>Synchronous Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYNC3</name>
<description>Synchronous Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPDM</name>
<description>Synchronous Channels Update Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MODE0</name>
<description>Manual write of double buffer registers and manual update of synchronous channels</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE1</name>
<description>Manual write of double buffer registers and automatic update of synchronous channels</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE2</name>
<description>Automatic write of duty-cycle update registers by the PDC and automatic update of synchronous channels</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PTRM</name>
<description>PDC Transfer Request Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTRCS</name>
<description>PDC Transfer Request Comparison Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SCUC</name>
<description>PWM Sync Channels Update Control Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDULOCK</name>
<description>Synchronous Channels Update Unlock</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SCUP</name>
<description>PWM Sync Channels Update Period Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPR</name>
<description>Update Period</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPRCNT</name>
<description>Update Period Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SCUPUPD</name>
<description>PWM Sync Channels Update Period Update Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPRUPD</name>
<description>Update Period Update</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER2</name>
<description>PWM Interrupt Enable Register 2</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WRDY</name>
<description>Write Ready for Synchronous Channels Update Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>PDC End of TX Buffer Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>PDC TX Buffer Empty Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Synchronous Channels Update Underrun Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM0</name>
<description>Comparison 0 Match Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM1</name>
<description>Comparison 1 Match Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM2</name>
<description>Comparison 2 Match Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM3</name>
<description>Comparison 3 Match Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM4</name>
<description>Comparison 4 Match Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM5</name>
<description>Comparison 5 Match Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM6</name>
<description>Comparison 6 Match Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM7</name>
<description>Comparison 7 Match Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU0</name>
<description>Comparison 0 Update Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU1</name>
<description>Comparison 1 Update Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU2</name>
<description>Comparison 2 Update Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU3</name>
<description>Comparison 3 Update Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU4</name>
<description>Comparison 4 Update Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU5</name>
<description>Comparison 5 Update Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU6</name>
<description>Comparison 6 Update Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU7</name>
<description>Comparison 7 Update Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR2</name>
<description>PWM Interrupt Disable Register 2</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WRDY</name>
<description>Write Ready for Synchronous Channels Update Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>PDC End of TX Buffer Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>PDC TX Buffer Empty Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Synchronous Channels Update Underrun Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM0</name>
<description>Comparison 0 Match Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM1</name>
<description>Comparison 1 Match Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM2</name>
<description>Comparison 2 Match Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM3</name>
<description>Comparison 3 Match Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM4</name>
<description>Comparison 4 Match Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM5</name>
<description>Comparison 5 Match Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM6</name>
<description>Comparison 6 Match Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPM7</name>
<description>Comparison 7 Match Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU0</name>
<description>Comparison 0 Update Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU1</name>
<description>Comparison 1 Update Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU2</name>
<description>Comparison 2 Update Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU3</name>
<description>Comparison 3 Update Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU4</name>
<description>Comparison 4 Update Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU5</name>
<description>Comparison 5 Update Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU6</name>
<description>Comparison 6 Update Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMPU7</name>
<description>Comparison 7 Update Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR2</name>
<description>PWM Interrupt Mask Register 2</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRDY</name>
<description>Write Ready for Synchronous Channels Update Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>PDC End of TX Buffer Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>PDC TX Buffer Empty Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Synchronous Channels Update Underrun Error Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM0</name>
<description>Comparison 0 Match Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM1</name>
<description>Comparison 1 Match Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM2</name>
<description>Comparison 2 Match Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM3</name>
<description>Comparison 3 Match Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM4</name>
<description>Comparison 4 Match Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM5</name>
<description>Comparison 5 Match Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM6</name>
<description>Comparison 6 Match Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM7</name>
<description>Comparison 7 Match Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU0</name>
<description>Comparison 0 Update Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU1</name>
<description>Comparison 1 Update Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU2</name>
<description>Comparison 2 Update Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU3</name>
<description>Comparison 3 Update Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU4</name>
<description>Comparison 4 Update Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU5</name>
<description>Comparison 5 Update Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU6</name>
<description>Comparison 6 Update Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU7</name>
<description>Comparison 7 Update Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR2</name>
<description>PWM Interrupt Status Register 2</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRDY</name>
<description>Write Ready for Synchronous Channels Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>PDC End of TX Buffer</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>PDC TX Buffer Empty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Synchronous Channels Update Underrun Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM0</name>
<description>Comparison 0 Match</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM1</name>
<description>Comparison 1 Match</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM2</name>
<description>Comparison 2 Match</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM3</name>
<description>Comparison 3 Match</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM4</name>
<description>Comparison 4 Match</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM5</name>
<description>Comparison 5 Match</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM6</name>
<description>Comparison 6 Match</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPM7</name>
<description>Comparison 7 Match</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU0</name>
<description>Comparison 0 Update</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU1</name>
<description>Comparison 1 Update</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU2</name>
<description>Comparison 2 Update</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU3</name>
<description>Comparison 3 Update</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU4</name>
<description>Comparison 4 Update</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU5</name>
<description>Comparison 5 Update</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU6</name>
<description>Comparison 6 Update</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMPU7</name>
<description>Comparison 7 Update</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OOV</name>
<description>PWM Output Override Value Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OOVH0</name>
<description>Output Override Value for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVH1</name>
<description>Output Override Value for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVH2</name>
<description>Output Override Value for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVH3</name>
<description>Output Override Value for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVL0</name>
<description>Output Override Value for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVL1</name>
<description>Output Override Value for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVL2</name>
<description>Output Override Value for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OOVL3</name>
<description>Output Override Value for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OS</name>
<description>PWM Output Selection Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OSH0</name>
<description>Output Selection for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSH1</name>
<description>Output Selection for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSH2</name>
<description>Output Selection for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSH3</name>
<description>Output Selection for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSL0</name>
<description>Output Selection for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSL1</name>
<description>Output Selection for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSL2</name>
<description>Output Selection for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSL3</name>
<description>Output Selection for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OSS</name>
<description>PWM Output Selection Set Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>OSSH0</name>
<description>Output Selection Set for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSH1</name>
<description>Output Selection Set for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSH2</name>
<description>Output Selection Set for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSH3</name>
<description>Output Selection Set for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSL0</name>
<description>Output Selection Set for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSL1</name>
<description>Output Selection Set for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSL2</name>
<description>Output Selection Set for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSL3</name>
<description>Output Selection Set for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSC</name>
<description>PWM Output Selection Clear Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>OSCH0</name>
<description>Output Selection Clear for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCH1</name>
<description>Output Selection Clear for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCH2</name>
<description>Output Selection Clear for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCH3</name>
<description>Output Selection Clear for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCL0</name>
<description>Output Selection Clear for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCL1</name>
<description>Output Selection Clear for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCL2</name>
<description>Output Selection Clear for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCL3</name>
<description>Output Selection Clear for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSSUPD</name>
<description>PWM Output Selection Set Update Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>OSSUPH0</name>
<description>Output Selection Set for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPH1</name>
<description>Output Selection Set for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPH2</name>
<description>Output Selection Set for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPH3</name>
<description>Output Selection Set for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPL0</name>
<description>Output Selection Set for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPL1</name>
<description>Output Selection Set for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPL2</name>
<description>Output Selection Set for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSSUPL3</name>
<description>Output Selection Set for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSCUPD</name>
<description>PWM Output Selection Clear Update Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>OSCUPH0</name>
<description>Output Selection Clear for PWMH output of the channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPH1</name>
<description>Output Selection Clear for PWMH output of the channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPH2</name>
<description>Output Selection Clear for PWMH output of the channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPH3</name>
<description>Output Selection Clear for PWMH output of the channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPL0</name>
<description>Output Selection Clear for PWML output of the channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPL1</name>
<description>Output Selection Clear for PWML output of the channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPL2</name>
<description>Output Selection Clear for PWML output of the channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OSCUPL3</name>
<description>Output Selection Clear for PWML output of the channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FMR</name>
<description>PWM Fault Mode Register</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FPOL</name>
<description>Fault Polarity (fault input bit varies from 0 to 5)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FMOD</name>
<description>Fault Activation Mode (fault input bit varies from 0 to 5)</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FFIL</name>
<description>Fault Filtering (fault input bit varies from 0 to 5)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FSR</name>
<description>PWM Fault Status Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIV</name>
<description>Fault Input Value (fault input bit varies from 0 to 5)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FS</name>
<description>Fault Status (fault input bit varies from 0 to 5)</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FCR</name>
<description>PWM Fault Clear Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FCLR</name>
<description>Fault Clear (fault input bit varies from 0 to 5)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FPV</name>
<description>PWM Fault Protection Value Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FPVH0</name>
<description>Fault Protection Value for PWMH output on channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVH1</name>
<description>Fault Protection Value for PWMH output on channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVH2</name>
<description>Fault Protection Value for PWMH output on channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVH3</name>
<description>Fault Protection Value for PWMH output on channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVL0</name>
<description>Fault Protection Value for PWML output on channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVL1</name>
<description>Fault Protection Value for PWML output on channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVL2</name>
<description>Fault Protection Value for PWML output on channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPVL3</name>
<description>Fault Protection Value for PWML output on channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FPE</name>
<description>PWM Fault Protection Enable Register</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FPE0</name>
<description>Fault Protection Enable for channel 0 (fault input bit varies from 0 to 5)</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPE1</name>
<description>Fault Protection Enable for channel 1 (fault input bit varies from 0 to 5)</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPE2</name>
<description>Fault Protection Enable for channel 2 (fault input bit varies from 0 to 5)</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FPE3</name>
<description>Fault Protection Enable for channel 3 (fault input bit varies from 0 to 5)</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>ELMR[%s]</name>
<description>PWM Event Line 0 Mode Register</description>
<addressOffset>0x0000007C</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CSEL0</name>
<description>Comparison 0 Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL1</name>
<description>Comparison 1 Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL2</name>
<description>Comparison 2 Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL3</name>
<description>Comparison 3 Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL4</name>
<description>Comparison 4 Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL5</name>
<description>Comparison 5 Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL6</name>
<description>Comparison 6 Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSEL7</name>
<description>Comparison 7 Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SMMR</name>
<description>PWM Stepper Motor Mode Register</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GCEN0</name>
<description>Gray Count ENable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GCEN1</name>
<description>Gray Count ENable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN0</name>
<description>DOWN Count</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOWN1</name>
<description>DOWN Count</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPCR</name>
<description>PWM Write Protect Control Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WPCMD</name>
<description>Write Protect Command</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG0</name>
<description>Write Protect Register Group 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG1</name>
<description>Write Protect Register Group 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG2</name>
<description>Write Protect Register Group 2</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG3</name>
<description>Write Protect Register Group 3</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG4</name>
<description>Write Protect Register Group 4</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPRG5</name>
<description>Write Protect Register Group 5</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect Key</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>PWM Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPSWS0</name>
<description>Write Protect SW Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPSWS1</name>
<description>Write Protect SW Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPSWS2</name>
<description>Write Protect SW Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPSWS3</name>
<description>Write Protect SW Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPSWS4</name>
<description>Write Protect SW Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPSWS5</name>
<description>Write Protect SW Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS0</name>
<description>Write Protect HW Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS1</name>
<description>Write Protect HW Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS2</name>
<description>Write Protect HW Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS3</name>
<description>Write Protect HW Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS4</name>
<description>Write Protect HW Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPHWS5</name>
<description>Write Protect HW Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV0</name>
<description>PWM Comparison 0 Value Register</description>
<addressOffset>0x00000130</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD0</name>
<description>PWM Comparison 0 Value Update Register</description>
<addressOffset>0x00000134</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM0</name>
<description>PWM Comparison 0 Mode Register</description>
<addressOffset>0x00000138</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD0</name>
<description>PWM Comparison 0 Mode Update Register</description>
<addressOffset>0x0000013C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV1</name>
<description>PWM Comparison 1 Value Register</description>
<addressOffset>0x00000140</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD1</name>
<description>PWM Comparison 1 Value Update Register</description>
<addressOffset>0x00000144</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM1</name>
<description>PWM Comparison 1 Mode Register</description>
<addressOffset>0x00000148</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD1</name>
<description>PWM Comparison 1 Mode Update Register</description>
<addressOffset>0x0000014C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV2</name>
<description>PWM Comparison 2 Value Register</description>
<addressOffset>0x00000150</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD2</name>
<description>PWM Comparison 2 Value Update Register</description>
<addressOffset>0x00000154</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM2</name>
<description>PWM Comparison 2 Mode Register</description>
<addressOffset>0x00000158</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD2</name>
<description>PWM Comparison 2 Mode Update Register</description>
<addressOffset>0x0000015C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV3</name>
<description>PWM Comparison 3 Value Register</description>
<addressOffset>0x00000160</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD3</name>
<description>PWM Comparison 3 Value Update Register</description>
<addressOffset>0x00000164</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM3</name>
<description>PWM Comparison 3 Mode Register</description>
<addressOffset>0x00000168</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD3</name>
<description>PWM Comparison 3 Mode Update Register</description>
<addressOffset>0x0000016C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV4</name>
<description>PWM Comparison 4 Value Register</description>
<addressOffset>0x00000170</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD4</name>
<description>PWM Comparison 4 Value Update Register</description>
<addressOffset>0x00000174</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM4</name>
<description>PWM Comparison 4 Mode Register</description>
<addressOffset>0x00000178</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD4</name>
<description>PWM Comparison 4 Mode Update Register</description>
<addressOffset>0x0000017C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV5</name>
<description>PWM Comparison 5 Value Register</description>
<addressOffset>0x00000180</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD5</name>
<description>PWM Comparison 5 Value Update Register</description>
<addressOffset>0x00000184</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM5</name>
<description>PWM Comparison 5 Mode Register</description>
<addressOffset>0x00000188</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD5</name>
<description>PWM Comparison 5 Mode Update Register</description>
<addressOffset>0x0000018C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV6</name>
<description>PWM Comparison 6 Value Register</description>
<addressOffset>0x00000190</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD6</name>
<description>PWM Comparison 6 Value Update Register</description>
<addressOffset>0x00000194</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM6</name>
<description>PWM Comparison 6 Mode Register</description>
<addressOffset>0x00000198</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD6</name>
<description>PWM Comparison 6 Mode Update Register</description>
<addressOffset>0x0000019C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPV7</name>
<description>PWM Comparison 7 Value Register</description>
<addressOffset>0x000001A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Comparison x Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CVM</name>
<description>Comparison x Value Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPVUPD7</name>
<description>PWM Comparison 7 Value Update Register</description>
<addressOffset>0x000001A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CVUPD</name>
<description>Comparison x Value Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CVMUPD</name>
<description>Comparison x Value Mode Update</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMPM7</name>
<description>PWM Comparison 7 Mode Register</description>
<addressOffset>0x000001A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Comparison x Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CTR</name>
<description>Comparison x Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPR</name>
<description>Comparison x Period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPRCNT</name>
<description>Comparison x Period Counter</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPR</name>
<description>Comparison x Update Period</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CUPRCNT</name>
<description>Comparison x Update Period Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMPMUPD7</name>
<description>PWM Comparison 7 Mode Update Register</description>
<addressOffset>0x000001AC</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CENUPD</name>
<description>Comparison x Enable Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTRUPD</name>
<description>Comparison x Trigger Update</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPRUPD</name>
<description>Comparison x Period Update</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CUPRUPD</name>
<description>Comparison x Update Period Update</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>PWM Channel Mode Register (ch_num = 0)</description>
<addressOffset>0x00000200</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_2</name>
<description>Master clock/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_4</name>
<description>Master clock/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_8</name>
<description>Master clock/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_16</name>
<description>Master clock/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_32</name>
<description>Master clock/32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_64</name>
<description>Master clock/64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_128</name>
<description>Master clock/128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_256</name>
<description>Master clock/256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_512</name>
<description>Master clock/512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_1024</name>
<description>Master clock/1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CES</name>
<description>Counter Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTE</name>
<description>Dead-Time Generator Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTHI</name>
<description>Dead-Time PWMHx Output Inverted</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTLI</name>
<description>Dead-Time PWMLx Output Inverted</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY0</name>
<description>PWM Channel Duty Cycle Register (ch_num = 0)</description>
<addressOffset>0x00000204</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty-Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTYUPD0</name>
<description>PWM Channel Duty Cycle Update Register (ch_num = 0)</description>
<addressOffset>0x00000208</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CDTYUPD</name>
<description>Channel Duty-Cycle Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CPRD0</name>
<description>PWM Channel Period Register (ch_num = 0)</description>
<addressOffset>0x0000020C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRDUPD0</name>
<description>PWM Channel Period Update Register (ch_num = 0)</description>
<addressOffset>0x00000210</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CPRDUPD</name>
<description>Channel Period Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CCNT0</name>
<description>PWM Channel Counter Register (ch_num = 0)</description>
<addressOffset>0x00000214</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DT0</name>
<description>PWM Channel Dead Time Register (ch_num = 0)</description>
<addressOffset>0x00000218</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTH</name>
<description>Dead-Time Value for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTL</name>
<description>Dead-Time Value for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTUPD0</name>
<description>PWM Channel Dead Time Update Register (ch_num = 0)</description>
<addressOffset>0x0000021C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DTHUPD</name>
<description>Dead-Time Value Update for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTLUPD</name>
<description>Dead-Time Value Update for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>PWM Channel Mode Register (ch_num = 1)</description>
<addressOffset>0x00000220</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_2</name>
<description>Master clock/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_4</name>
<description>Master clock/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_8</name>
<description>Master clock/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_16</name>
<description>Master clock/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_32</name>
<description>Master clock/32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_64</name>
<description>Master clock/64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_128</name>
<description>Master clock/128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_256</name>
<description>Master clock/256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_512</name>
<description>Master clock/512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_1024</name>
<description>Master clock/1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CES</name>
<description>Counter Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTE</name>
<description>Dead-Time Generator Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTHI</name>
<description>Dead-Time PWMHx Output Inverted</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTLI</name>
<description>Dead-Time PWMLx Output Inverted</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY1</name>
<description>PWM Channel Duty Cycle Register (ch_num = 1)</description>
<addressOffset>0x00000224</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty-Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTYUPD1</name>
<description>PWM Channel Duty Cycle Update Register (ch_num = 1)</description>
<addressOffset>0x00000228</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CDTYUPD</name>
<description>Channel Duty-Cycle Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CPRD1</name>
<description>PWM Channel Period Register (ch_num = 1)</description>
<addressOffset>0x0000022C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRDUPD1</name>
<description>PWM Channel Period Update Register (ch_num = 1)</description>
<addressOffset>0x00000230</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CPRDUPD</name>
<description>Channel Period Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CCNT1</name>
<description>PWM Channel Counter Register (ch_num = 1)</description>
<addressOffset>0x00000234</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DT1</name>
<description>PWM Channel Dead Time Register (ch_num = 1)</description>
<addressOffset>0x00000238</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTH</name>
<description>Dead-Time Value for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTL</name>
<description>Dead-Time Value for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTUPD1</name>
<description>PWM Channel Dead Time Update Register (ch_num = 1)</description>
<addressOffset>0x0000023C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DTHUPD</name>
<description>Dead-Time Value Update for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTLUPD</name>
<description>Dead-Time Value Update for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>PWM Channel Mode Register (ch_num = 2)</description>
<addressOffset>0x00000240</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_2</name>
<description>Master clock/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_4</name>
<description>Master clock/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_8</name>
<description>Master clock/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_16</name>
<description>Master clock/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_32</name>
<description>Master clock/32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_64</name>
<description>Master clock/64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_128</name>
<description>Master clock/128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_256</name>
<description>Master clock/256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_512</name>
<description>Master clock/512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_1024</name>
<description>Master clock/1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CES</name>
<description>Counter Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTE</name>
<description>Dead-Time Generator Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTHI</name>
<description>Dead-Time PWMHx Output Inverted</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTLI</name>
<description>Dead-Time PWMLx Output Inverted</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY2</name>
<description>PWM Channel Duty Cycle Register (ch_num = 2)</description>
<addressOffset>0x00000244</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty-Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTYUPD2</name>
<description>PWM Channel Duty Cycle Update Register (ch_num = 2)</description>
<addressOffset>0x00000248</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CDTYUPD</name>
<description>Channel Duty-Cycle Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CPRD2</name>
<description>PWM Channel Period Register (ch_num = 2)</description>
<addressOffset>0x0000024C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRDUPD2</name>
<description>PWM Channel Period Update Register (ch_num = 2)</description>
<addressOffset>0x00000250</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CPRDUPD</name>
<description>Channel Period Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CCNT2</name>
<description>PWM Channel Counter Register (ch_num = 2)</description>
<addressOffset>0x00000254</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DT2</name>
<description>PWM Channel Dead Time Register (ch_num = 2)</description>
<addressOffset>0x00000258</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTH</name>
<description>Dead-Time Value for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTL</name>
<description>Dead-Time Value for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTUPD2</name>
<description>PWM Channel Dead Time Update Register (ch_num = 2)</description>
<addressOffset>0x0000025C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DTHUPD</name>
<description>Dead-Time Value Update for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTLUPD</name>
<description>Dead-Time Value Update for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR3</name>
<description>PWM Channel Mode Register (ch_num = 3)</description>
<addressOffset>0x00000260</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_2</name>
<description>Master clock/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_4</name>
<description>Master clock/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_8</name>
<description>Master clock/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_16</name>
<description>Master clock/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_32</name>
<description>Master clock/32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_64</name>
<description>Master clock/64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_128</name>
<description>Master clock/128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_256</name>
<description>Master clock/256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_512</name>
<description>Master clock/512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK_DIV_1024</name>
<description>Master clock/1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CES</name>
<description>Counter Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTE</name>
<description>Dead-Time Generator Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTHI</name>
<description>Dead-Time PWMHx Output Inverted</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTLI</name>
<description>Dead-Time PWMLx Output Inverted</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY3</name>
<description>PWM Channel Duty Cycle Register (ch_num = 3)</description>
<addressOffset>0x00000264</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty-Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTYUPD3</name>
<description>PWM Channel Duty Cycle Update Register (ch_num = 3)</description>
<addressOffset>0x00000268</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CDTYUPD</name>
<description>Channel Duty-Cycle Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CPRD3</name>
<description>PWM Channel Period Register (ch_num = 3)</description>
<addressOffset>0x0000026C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRDUPD3</name>
<description>PWM Channel Period Update Register (ch_num = 3)</description>
<addressOffset>0x00000270</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CPRDUPD</name>
<description>Channel Period Update</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CCNT3</name>
<description>PWM Channel Counter Register (ch_num = 3)</description>
<addressOffset>0x00000274</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DT3</name>
<description>PWM Channel Dead Time Register (ch_num = 3)</description>
<addressOffset>0x00000278</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTH</name>
<description>Dead-Time Value for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTL</name>
<description>Dead-Time Value for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTUPD3</name>
<description>PWM Channel Dead Time Update Register (ch_num = 3)</description>
<addressOffset>0x0000027C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DTHUPD</name>
<description>Dead-Time Value Update for PWMHx Output</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTLUPD</name>
<description>Dead-Time Value Update for PWMLx Output</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART0</name>
<version>6089ZC</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 0</description>
<groupName>USART</groupName>
<prependToName>USART0_</prependToName>
<baseAddress>0x40024000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART0</name>
<value>14</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTREN</name>
<description>Data Terminal Ready Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTRDIS</name>
<description>Data Terminal Ready Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MODEM</name>
<description>Modem</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVDATA</name>
<description>Inverted Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Flag</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RI</name>
<description>Image of RI Input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSR</name>
<description>Image of DSR Input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCD</name>
<description>Image of DCD Input</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY.</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x555341</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>VERSION</name>
<description>Version Register</description>
<addressOffset>0x000000FC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>VERSION</name>
<description>Hardware Module Version</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MFN</name>
<description>Metal Fix Number</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART1</name>
<version>6089ZC</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 1</description>
<groupName>USART</groupName>
<prependToName>USART1_</prependToName>
<baseAddress>0x40028000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART1</name>
<value>15</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTREN</name>
<description>Data Terminal Ready Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTRDIS</name>
<description>Data Terminal Ready Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MODEM</name>
<description>Modem</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVDATA</name>
<description>Inverted Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RIIC</name>
<description>Ring Indicator Input Change Flag</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSRIC</name>
<description>Data Set Ready Input Change Flag</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCDIC</name>
<description>Data Carrier Detect Input Change Flag</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RI</name>
<description>Image of RI Input</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DSR</name>
<description>Image of DSR Input</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCD</name>
<description>Image of DCD Input</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY.</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x555341</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>VERSION</name>
<description>Version Register</description>
<addressOffset>0x000000FC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>VERSION</name>
<description>Hardware Module Version</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MFN</name>
<description>Metal Fix Number</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>UDP</name>
<version>6083V</version>
<description>USB Device Port</description>
<prependToName>UDP_</prependToName>
<baseAddress>0x40034000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>UDP</name>
<value>34</value>
</interrupt>
<registers>
<register>
<name>FRM_NUM</name>
<description>Frame Number Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRM_NUM</name>
<description>Frame Number as Defined in the Packet Field Formats</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRM_ERR</name>
<description>Frame Error</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRM_OK</name>
<description>Frame OK</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>GLB_STAT</name>
<description>Global State Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>FADDEN</name>
<description>Function Address Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CONFG</name>
<description>Configured</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ESR</name>
<description>Enable Send Resume</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RSMINPR</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RMWUPE</name>
<description>Remote Wake Up Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FADDR</name>
<description>Function Address Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000100</resetValue>
<fields>
<field>
<name>FADD</name>
<description>Function Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FEN</name>
<description>Function Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EP0INT</name>
<description>Enable Endpoint 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP1INT</name>
<description>Enable Endpoint 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP2INT</name>
<description>Enable Endpoint 2Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP3INT</name>
<description>Enable Endpoint 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP4INT</name>
<description>Enable Endpoint 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP5INT</name>
<description>Enable Endpoint 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP6INT</name>
<description>Enable Endpoint 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP7INT</name>
<description>Enable Endpoint 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSUSP</name>
<description>Enable UDP Suspend Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRSM</name>
<description>Enable UDP Resume Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EXTRSM</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SOFINT</name>
<description>Enable Start Of Frame Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WAKEUP</name>
<description>Enable UDP bus Wakeup Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EP0INT</name>
<description>Disable Endpoint 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP1INT</name>
<description>Disable Endpoint 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP2INT</name>
<description>Disable Endpoint 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP3INT</name>
<description>Disable Endpoint 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP4INT</name>
<description>Disable Endpoint 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP5INT</name>
<description>Disable Endpoint 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP6INT</name>
<description>Disable Endpoint 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EP7INT</name>
<description>Disable Endpoint 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSUSP</name>
<description>Disable UDP Suspend Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRSM</name>
<description>Disable UDP Resume Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EXTRSM</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SOFINT</name>
<description>Disable Start Of Frame Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WAKEUP</name>
<description>Disable USB Bus Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00001200</resetValue>
<fields>
<field>
<name>EP0INT</name>
<description>Mask Endpoint 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP1INT</name>
<description>Mask Endpoint 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP2INT</name>
<description>Mask Endpoint 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP3INT</name>
<description>Mask Endpoint 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP4INT</name>
<description>Mask Endpoint 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP5INT</name>
<description>Mask Endpoint 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP6INT</name>
<description>Mask Endpoint 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP7INT</name>
<description>Mask Endpoint 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSUSP</name>
<description>Mask UDP Suspend Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRSM</name>
<description>Mask UDP Resume Interrupt.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EXTRSM</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOFINT</name>
<description>Mask Start Of Frame Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BIT12</name>
<description>UDP_IMR Bit 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WAKEUP</name>
<description>USB Bus WAKEUP Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>EP0INT</name>
<description>Endpoint 0 Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP1INT</name>
<description>Endpoint 1 Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP2INT</name>
<description>Endpoint 2 Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP3INT</name>
<description>Endpoint 3 Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP4INT</name>
<description>Endpoint 4 Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP5INT</name>
<description>Endpoint 5 Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP6INT</name>
<description>Endpoint 6 Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EP7INT</name>
<description>Endpoint 7Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSUSP</name>
<description>UDP Suspend Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRSM</name>
<description>UDP Resume Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EXTRSM</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SOFINT</name>
<description>Start of Frame Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDBUSRES</name>
<description>End of BUS Reset Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WAKEUP</name>
<description>UDP Resume Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ICR</name>
<description>Interrupt Clear Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXSUSP</name>
<description>Clear UDP Suspend Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRSM</name>
<description>Clear UDP Resume Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EXTRSM</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SOFINT</name>
<description>Clear Start Of Frame Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDBUSRES</name>
<description>Clear End of Bus Reset Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WAKEUP</name>
<description>Clear Wakeup Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RST_EP</name>
<description>Reset Endpoint Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EP0</name>
<description>Reset Endpoint 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP1</name>
<description>Reset Endpoint 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP2</name>
<description>Reset Endpoint 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP3</name>
<description>Reset Endpoint 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP4</name>
<description>Reset Endpoint 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP5</name>
<description>Reset Endpoint 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP6</name>
<description>Reset Endpoint 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EP7</name>
<description>Reset Endpoint 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-7</dimIndex>
<name>CSR[%s]</name>
<description>Endpoint Control and Status Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Generates an IN Packet with Data Previously Written in the DPR</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_DATA_BK0</name>
<description>Receive Data Bank 0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXSETUP</name>
<description>Received Setup</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STALLSENT</name>
<description>Stall Sent</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXPKTRDY</name>
<description>Transmit Packet Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FORCESTALL</name>
<description>Force Stall (used by Control, Bulk and Isochronous Endpoints)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_DATA_BK1</name>
<description>Receive Data Bank 1 (only used by endpoints with ping-pong attributes)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIR</name>
<description>Transfer Direction (only available for control endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPTYPE</name>
<description>Endpoint Type</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL</name>
<description>Control</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO_OUT</name>
<description>Isochronous OUT</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK_OUT</name>
<description>Bulk OUT</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT_OUT</name>
<description>Interrupt OUT</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO_IN</name>
<description>Isochronous IN</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK_IN</name>
<description>Bulk IN</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>INT_IN</name>
<description>Interrupt IN</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DTGLE</name>
<description>Data Toggle</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPEDS</name>
<description>Endpoint Enable Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXBYTECNT</name>
<description>Number of Bytes Available in the FIFO</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CSR0_ISOENDPT</name>
<description>Endpoint Control and Status Register</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Generates an IN Packet with Data Previously Written in the DPR</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_DATA_BK0</name>
<description>Receive Data Bank 0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXSETUP</name>
<description>Received Setup</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ISOERROR</name>
<description>A CRC error has been detected in an isochronous transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXPKTRDY</name>
<description>Transmit Packet Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FORCESTALL</name>
<description>Force Stall (used by Control, Bulk and Isochronous Endpoints)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_DATA_BK1</name>
<description>Receive Data Bank 1 (only used by endpoints with ping-pong attributes)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIR</name>
<description>Transfer Direction (only available for control endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPTYPE</name>
<description>Endpoint Type</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL</name>
<description>Control</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO_OUT</name>
<description>Isochronous OUT</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO_IN</name>
<description>Isochronous IN</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK_OUT</name>
<description>Bulk OUT</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK_IN</name>
<description>Bulk IN</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>INT_OUT</name>
<description>Interrupt OUT</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>INT_IN</name>
<description>Interrupt IN</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DTGLE</name>
<description>Data Toggle</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPEDS</name>
<description>Endpoint Enable Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXBYTECNT</name>
<description>Number of Bytes Available in the FIFO</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-7</dimIndex>
<name>FDR[%s]</name>
<description>Endpoint FIFO Data Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>FIFO_DATA</name>
<description>FIFO Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TXVC</name>
<description>Transceiver Control Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000100</resetValue>
<fields>
<field>
<name>TXVDIS</name>
<description>Transceiver Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PUON</name>
<description>Pull-up On</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ADC</name>
<version>6489Q</version>
<description>Analog-to-Digital Converter</description>
<prependToName>ADC_</prependToName>
<baseAddress>0x40038000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ADC</name>
<value>29</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>START</name>
<description>Start Conversion</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRGEN</name>
<description>Trigger Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>Hardware triggers are disabled. Starting a conversion is only possible by software.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>Hardware trigger selected by TRGSEL field is enabled.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRGSEL</name>
<description>Trigger Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ADC_TRIG0</name>
<description>External trigger</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ADC_TRIG1</name>
<description>TIO Output of the Timer Counter Channel 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ADC_TRIG2</name>
<description>TIO Output of the Timer Counter Channel 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ADC_TRIG3</name>
<description>TIO Output of the Timer Counter Channel 2</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>ADC_TRIG4</name>
<description>PWM Event Line 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>ADC_TRIG5</name>
<description>PWM Event Line 1</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLEEP</name>
<description>Sleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode: The ADC Core and reference voltage circuitry are kept ON between conversions</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SLEEP</name>
<description>Sleep Mode: The wake-up time can be modified by programming FWUP bit</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FWUP</name>
<description>Fast Wake Up</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>OFF</name>
<description>If SLEEP is 1 then both ADC Core and reference voltage circuitry are OFF between conversions</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>If SLEEP is 1 then Fast Wake-up Sleep Mode: The Voltage reference is ON between conversions and ADC Core is OFF</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FREERUN</name>
<description>Free Run Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>OFF</name>
<description>Normal Mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>Free Run Mode: Never wait for any trigger.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCAL</name>
<description>Prescaler Rate Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STARTUP</name>
<description>Start Up Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SUT0</name>
<description>0 periods of ADCClock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT8</name>
<description>8 periods of ADCClock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT16</name>
<description>16 periods of ADCClock</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT24</name>
<description>24 periods of ADCClock</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT64</name>
<description>64 periods of ADCClock</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT80</name>
<description>80 periods of ADCClock</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT96</name>
<description>96 periods of ADCClock</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT112</name>
<description>112 periods of ADCClock</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT512</name>
<description>512 periods of ADCClock</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT576</name>
<description>576 periods of ADCClock</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT640</name>
<description>640 periods of ADCClock</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT704</name>
<description>704 periods of ADCClock</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT768</name>
<description>768 periods of ADCClock</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT832</name>
<description>832 periods of ADCClock</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT896</name>
<description>896 periods of ADCClock</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SUT960</name>
<description>960 periods of ADCClock</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SETTLING</name>
<description>Analog Settling Time</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AST3</name>
<description>3 periods of ADCClock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AST5</name>
<description>5 periods of ADCClock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AST9</name>
<description>9 periods of ADCClock</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AST17</name>
<description>17 periods of ADCClock</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ANACH</name>
<description>Analog Change</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No analog change on channel switching: DIFF0, GAIN0 and OFF0 are used for all channels</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALLOWED</name>
<description>Allows different analog settings for each channel. See ADC_CGR and ADC_COR Registers</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRACKTIM</name>
<description>Tracking Time</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRANSFER</name>
<description>Transfer Period</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USEQ</name>
<description>Use Sequence Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NUM_ORDER</name>
<description>Normal Mode: The controller converts channels in a simple numeric order depending only on the channel index.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>REG_ORDER</name>
<description>User Sequence Mode: The sequence respects what is defined in ADC_SEQR1 and ADC_SEQR2 registers and can be used to convert several times the same channel.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>SEQR[%s]</name>
<description>Channel Sequence Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
</register>
<register>
<name>CHER</name>
<description>Channel Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH8</name>
<description>Channel 8 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH9</name>
<description>Channel 9 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH10</name>
<description>Channel 10 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH11</name>
<description>Channel 11 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH12</name>
<description>Channel 12 Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH13</name>
<description>Channel 13 Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH14</name>
<description>Channel 14 Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH15</name>
<description>Channel 15 Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHDR</name>
<description>Channel Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH8</name>
<description>Channel 8 Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH9</name>
<description>Channel 9 Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH10</name>
<description>Channel 10 Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH11</name>
<description>Channel 11 Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH12</name>
<description>Channel 12 Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH13</name>
<description>Channel 13 Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH14</name>
<description>Channel 14 Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH15</name>
<description>Channel 15 Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH8</name>
<description>Channel 8 Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH9</name>
<description>Channel 9 Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH10</name>
<description>Channel 10 Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH11</name>
<description>Channel 11 Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH12</name>
<description>Channel 12 Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH13</name>
<description>Channel 13 Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH14</name>
<description>Channel 14 Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH15</name>
<description>Channel 15 Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>LCDR</name>
<description>Last Converted Data Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LDATA</name>
<description>Last Data Converted</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHNB</name>
<description>Channel Number</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Enable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Enable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Enable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Enable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Enable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Enable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC8</name>
<description>End of Conversion Interrupt Enable 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC9</name>
<description>End of Conversion Interrupt Enable 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC10</name>
<description>End of Conversion Interrupt Enable 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC11</name>
<description>End of Conversion Interrupt Enable 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC12</name>
<description>End of Conversion Interrupt Enable 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC13</name>
<description>End of Conversion Interrupt Enable 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC14</name>
<description>End of Conversion Interrupt Enable 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC15</name>
<description>End of Conversion Interrupt Enable 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMPE</name>
<description>Comparison Event Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Disable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Disable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Disable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Disable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Disable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Disable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Disable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Disable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC8</name>
<description>End of Conversion Interrupt Disable 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC9</name>
<description>End of Conversion Interrupt Disable 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC10</name>
<description>End of Conversion Interrupt Disable 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC11</name>
<description>End of Conversion Interrupt Disable 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC12</name>
<description>End of Conversion Interrupt Disable 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC13</name>
<description>End of Conversion Interrupt Disable 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC14</name>
<description>End of Conversion Interrupt Disable 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC15</name>
<description>End of Conversion Interrupt Disable 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMPE</name>
<description>Comparison Event Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Mask 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Mask 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Mask 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Mask 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Mask 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Mask 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Mask 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Mask 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC8</name>
<description>End of Conversion Interrupt Mask 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC9</name>
<description>End of Conversion Interrupt Mask 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC10</name>
<description>End of Conversion Interrupt Mask 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC11</name>
<description>End of Conversion Interrupt Mask 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC12</name>
<description>End of Conversion Interrupt Mask 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC13</name>
<description>End of Conversion Interrupt Mask 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC14</name>
<description>End of Conversion Interrupt Mask 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC15</name>
<description>End of Conversion Interrupt Mask 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMPE</name>
<description>Comparison Event Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC8</name>
<description>End of Conversion 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC9</name>
<description>End of Conversion 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC10</name>
<description>End of Conversion 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC11</name>
<description>End of Conversion 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC12</name>
<description>End of Conversion 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC13</name>
<description>End of Conversion 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC14</name>
<description>End of Conversion 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC15</name>
<description>End of Conversion 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMPE</name>
<description>Comparison Error</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX Buffer</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OVER</name>
<description>Overrun Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVRE0</name>
<description>Overrun Error 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE1</name>
<description>Overrun Error 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE2</name>
<description>Overrun Error 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE3</name>
<description>Overrun Error 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE4</name>
<description>Overrun Error 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE5</name>
<description>Overrun Error 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE6</name>
<description>Overrun Error 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE7</name>
<description>Overrun Error 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE8</name>
<description>Overrun Error 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE9</name>
<description>Overrun Error 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE10</name>
<description>Overrun Error 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE11</name>
<description>Overrun Error 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE12</name>
<description>Overrun Error 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE13</name>
<description>Overrun Error 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE14</name>
<description>Overrun Error 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE15</name>
<description>Overrun Error 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EMR</name>
<description>Extended Mode Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMPMODE</name>
<description>Comparison Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>LOW</name>
<description>Generates an event when the converted data is lower than the low threshold of the window.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Generates an event when the converted data is higher than the high threshold of the window.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>IN</name>
<description>Generates an event when the converted data is in the comparison window.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>OUT</name>
<description>Generates an event when the converted data is out of the comparison window.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMPSEL</name>
<description>Comparison Selected Channel</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CMPALL</name>
<description>Compare All Channels</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TAG</name>
<description>TAG of the ADC_LDCR register</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CWR</name>
<description>Compare Window Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LOWTHRES</name>
<description>Low Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HIGHTHRES</name>
<description>High Threshold</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CGR</name>
<description>Channel Gain Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GAIN0</name>
<description>Gain for Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN1</name>
<description>Gain for Channel 1</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN2</name>
<description>Gain for Channel 2</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN3</name>
<description>Gain for Channel 3</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN4</name>
<description>Gain for Channel 4</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN5</name>
<description>Gain for Channel 5</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN6</name>
<description>Gain for Channel 6</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN7</name>
<description>Gain for Channel 7</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN8</name>
<description>Gain for Channel 8</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN9</name>
<description>Gain for Channel 9</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN10</name>
<description>Gain for Channel 10</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN11</name>
<description>Gain for Channel 11</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN12</name>
<description>Gain for Channel 12</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN13</name>
<description>Gain for Channel 13</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN14</name>
<description>Gain for Channel 14</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GAIN15</name>
<description>Gain for Channel 15</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>COR</name>
<description>Channel Offset Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OFF0</name>
<description>Offset for channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF1</name>
<description>Offset for channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF2</name>
<description>Offset for channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF3</name>
<description>Offset for channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF4</name>
<description>Offset for channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF5</name>
<description>Offset for channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF6</name>
<description>Offset for channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF7</name>
<description>Offset for channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF8</name>
<description>Offset for channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF9</name>
<description>Offset for channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF10</name>
<description>Offset for channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF11</name>
<description>Offset for channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF12</name>
<description>Offset for channel 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF13</name>
<description>Offset for channel 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF14</name>
<description>Offset for channel 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OFF15</name>
<description>Offset for channel 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF0</name>
<description>Differential inputs for channel 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF1</name>
<description>Differential inputs for channel 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF2</name>
<description>Differential inputs for channel 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF3</name>
<description>Differential inputs for channel 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF4</name>
<description>Differential inputs for channel 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF5</name>
<description>Differential inputs for channel 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF6</name>
<description>Differential inputs for channel 6</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF7</name>
<description>Differential inputs for channel 7</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF8</name>
<description>Differential inputs for channel 8</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF9</name>
<description>Differential inputs for channel 9</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF10</name>
<description>Differential inputs for channel 10</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF11</name>
<description>Differential inputs for channel 11</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF12</name>
<description>Differential inputs for channel 12</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF13</name>
<description>Differential inputs for channel 13</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF14</name>
<description>Differential inputs for channel 14</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIFF15</name>
<description>Differential inputs for channel 15</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>15</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-14</dimIndex>
<name>CDR[%s]</name>
<description>Channel Data Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>DATA</name>
<description>Converted Data</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ACR</name>
<description>Analog Control Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000100</resetValue>
<fields>
<field>
<name>TSON</name>
<description>Temperature Sensor On</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IBCTL</name>
<description>ADC Bias Current Control</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0</description>
<value>0x414443</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DACC</name>
<version>6461G</version>
<description>Digital-to-Analog Converter Controller</description>
<prependToName>DACC_</prependToName>
<baseAddress>0x4003C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DACC</name>
<value>30</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRGEN</name>
<description>Trigger Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>External trigger mode disabled. DACC in free running mode.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>External trigger mode enabled.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRGSEL</name>
<description>Trigger Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TRGSEL0</name>
<description>External trigger</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRGSEL1</name>
<description>TIO Output of the Timer Counter Channel 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRGSEL2</name>
<description>TIO Output of the Timer Counter Channel 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TRGSEL3</name>
<description>TIO Output of the Timer Counter Channel 2</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TRGSEL4</name>
<description>PWM Event Line 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TRGSEL5</name>
<description>PWM Event Line 1</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WORD</name>
<description>Word Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HALF</name>
<description>Half-Word transfer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>Word Transfer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLEEP</name>
<description>Sleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLED</name>
<description>Normal Mode: The DAC Core and reference voltage circuitry are kept ON between conversions.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Sleep Mode: The DAC Core and/or reference voltage circuitry are OFF between conversions.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FASTWKUP</name>
<description>Fast Wake up Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>STAMODE</name>
<description>Normal Sleep Mode: The sleep mode is defined by the SLEEP bit. Voltage reference is OFF between conversions.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FASTWAKEUP</name>
<description>Fast Wake up after Sleep Mode: the voltage reference is kept ON between conversions but DAC Core is OFF</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>REFRESH</name>
<description>Refresh Period</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USER_SEL</name>
<description>User Channel Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHANNEL0</name>
<description>Channel 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHANNEL1</name>
<description>Channel 1</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TAG</name>
<description>Tag Selection Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>Tag selection mode disabled. Using USER_SEL to select the channel for the conversion.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>Tag selection mode enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXS</name>
<description>Max Speed Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MAXIMUM</name>
<description>Max Speed Mode enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STARTUP</name>
<description>Startup Time Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>0 periods of DACClock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 periods of DACClock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 periods of DACClock</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>24</name>
<description>24 periods of DACClock</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 periods of DACClock</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>80</name>
<description>80 periods of DACClock</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>96</name>
<description>96 periods of DACClock</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>112</name>
<description>112 periods of DACClock</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 periods of DACClock</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>576</name>
<description>576 periods of DACClock</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>640</name>
<description>640 periods of DACClock</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>704</name>
<description>704 periods of DACClock</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>768</name>
<description>768 periods of DACClock</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>832</name>
<description>832 periods of DACClock</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
<name>896</name>
<description>896 periods of DACClock</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>960</name>
<description>960 periods of DACClock</description>
<value>0xF</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 periods of DACClock</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>1088</name>
<description>1088 periods of DACClock</description>
<value>0x11</value>
</enumeratedValue>
<enumeratedValue>
<name>1152</name>
<description>1152 periods of DACClock</description>
<value>0x12</value>
</enumeratedValue>
<enumeratedValue>
<name>1216</name>
<description>1216 periods of DACClock</description>
<value>0x13</value>
</enumeratedValue>
<enumeratedValue>
<name>1280</name>
<description>1280 periods of DACClock</description>
<value>0x14</value>
</enumeratedValue>
<enumeratedValue>
<name>1344</name>
<description>1344 periods of DACClock</description>
<value>0x15</value>
</enumeratedValue>
<enumeratedValue>
<name>1408</name>
<description>1408 periods of DACClock</description>
<value>0x16</value>
</enumeratedValue>
<enumeratedValue>
<name>1472</name>
<description>1472 periods of DACClock</description>
<value>0x17</value>
</enumeratedValue>
<enumeratedValue>
<name>1536</name>
<description>1536 periods of DACClock</description>
<value>0x18</value>
</enumeratedValue>
<enumeratedValue>
<name>1600</name>
<description>1600 periods of DACClock</description>
<value>0x19</value>
</enumeratedValue>
<enumeratedValue>
<name>1664</name>
<description>1664 periods of DACClock</description>
<value>0x1A</value>
</enumeratedValue>
<enumeratedValue>
<name>1728</name>
<description>1728 periods of DACClock</description>
<value>0x1B</value>
</enumeratedValue>
<enumeratedValue>
<name>1792</name>
<description>1792 periods of DACClock</description>
<value>0x1C</value>
</enumeratedValue>
<enumeratedValue>
<name>1856</name>
<description>1856 periods of DACClock</description>
<value>0x1D</value>
</enumeratedValue>
<enumeratedValue>
<name>1920</name>
<description>1920 periods of DACClock</description>
<value>0x1E</value>
</enumeratedValue>
<enumeratedValue>
<name>1984</name>
<description>1984 periods of DACClock</description>
<value>0x1F</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CHER</name>
<description>Channel Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHDR</name>
<description>Channel Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CDR</name>
<description>Conversion Data Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data to Convert</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC</name>
<description>End of Conversion Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC</name>
<description>End of Conversion Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC</name>
<description>End of Conversion Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC</name>
<description>End of Conversion Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of DMA Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ACR</name>
<description>Analog Current Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IBCTLCH0</name>
<description>Analog Output Current Control</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IBCTLCH1</name>
<description>Analog Output Current Control</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IBCTLDACCORE</name>
<description>Bias Current Control for DAC Core</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0.</description>
<value>0x444143</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPROTERR</name>
<description>Write protection error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPROTADDR</name>
<description>Write protection error address</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ACC</name>
<version>6490C</version>
<description>Analog Comparator Controller</description>
<prependToName>ACC_</prependToName>
<baseAddress>0x40040000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ACC</name>
<value>33</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SWRST</name>
<description>SoftWare ReSeT</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SELMINUS</name>
<description>SELection for MINUS comparator input</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TS</name>
<description>SelectTS</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ADVREF</name>
<description>Select ADVREF</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DAC0</name>
<description>Select DAC0</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DAC1</name>
<description>Select DAC1</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AD0</name>
<description>Select AD0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AD1</name>
<description>Select AD1</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AD2</name>
<description>Select AD2</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>AD3</name>
<description>Select AD3</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SELPLUS</name>
<description>SELection for PLUS comparator input</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AD0</name>
<description>Select AD0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AD1</name>
<description>Select AD1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AD2</name>
<description>Select AD2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AD3</name>
<description>Select AD3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AD4</name>
<description>Select AD4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AD5</name>
<description>Select AD5</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AD6</name>
<description>Select AD6</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>AD7</name>
<description>Select AD7</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACEN</name>
<description>Analog Comparator ENable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>Analog Comparator Disabled.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>Analog Comparator Enabled.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EDGETYP</name>
<description>EDGE TYPe</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>RISING</name>
<description>only rising edge of comparator output</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>falling edge of comparator output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ANY</name>
<description>any edge of comparator output</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INV</name>
<description>INVert comparator output</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>Analog Comparator output is directly processed.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>Analog Comparator output is inverted prior to being processed.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SELFS</name>
<description>SELection of Fault Source</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CF</name>
<description>the CF flag is used to drive the FAULT output.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>OUTPUT</name>
<description>the output of the Analog Comparator flag is used to drive the FAULT output.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FE</name>
<description>Fault Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the FAULT output is tied to 0.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the FAULT output is driven by the signal defined by SELFS.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CE</name>
<description>Comparison Edge</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CE</name>
<description>Comparison Edge</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CE</name>
<description>Comparison Edge</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CE</name>
<description>Comparison Edge</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCO</name>
<description>Synchronized Comparator Output</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MASK</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ACR</name>
<description>Analog Control Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISEL</name>
<description>Current SELection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>LOPW</name>
<description>low power option.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HISP</name>
<description>high speed option.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HYST</name>
<description>HYSTeresis selection</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPROTERR</name>
<description>Write PROTection ERRor</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CRCCU</name>
<version>11001D</version>
<description>Cyclic Redundancy Check Calculation Unit</description>
<prependToName>CRCCU_</prependToName>
<baseAddress>0x40044000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>CRCCU</name>
<value>32</value>
</interrupt>
<registers>
<register>
<name>DSCR</name>
<description>CRCCU Descriptor Base Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR</name>
<description>Descriptor Base Address</description>
<bitOffset>9</bitOffset>
<bitWidth>23</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_EN</name>
<description>CRCCU DMA Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAEN</name>
<description>DMA Enable Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_DIS</name>
<description>CRCCU DMA Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMADIS</name>
<description>DMA Disable Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_SR</name>
<description>CRCCU DMA Status Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMASR</name>
<description>DMA Status Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_IER</name>
<description>CRCCU DMA Interrupt Enable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAIER</name>
<description>Interrupt Enable register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_IDR</name>
<description>CRCCU DMA Interrupt Disable Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAIDR</name>
<description>Interrupt Disable register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_IMR</name>
<description>CRCCU DMA Interrupt Mask Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAIMR</name>
<description>Interrupt Mask Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_ISR</name>
<description>CRCCU DMA Interrupt Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAISR</name>
<description>Interrupt Status register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CR</name>
<description>CRCCU Control Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RESET</name>
<description>CRC Computation Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>CRCCU Mode Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>CRC Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COMPARE</name>
<description>CRC Compare</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTYPE</name>
<description>Primitive Polynomial</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CCITT8023</name>
<description>Polynom 0x04C11DB7</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CASTAGNOLI</name>
<description>Polynom 0x1EDC6F41</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CCITT16</name>
<description>Polynom 0x1021</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIVIDER</name>
<description>Request Divider</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>CRCCU Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>CRC</name>
<description>Cyclic Redundancy Check Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>CRCCU Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ERRIER</name>
<description>CRC Error Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>CRCCU Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ERRIDR</name>
<description>CRC Error Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>CRCCU Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ERRIMR</name>
<description>CRC Error Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>CRCCU Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ERRISR</name>
<description>CRC Error Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SMC</name>
<version>6498F</version>
<description>Static Memory Controller</description>
<groupName>EBI</groupName>
<prependToName>SMC_</prependToName>
<baseAddress>0x400E0000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>SETUP0</name>
<description>SMC Setup Register (CS_number = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE0</name>
<description>SMC Pulse Register (CS_number = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE0</name>
<description>SMC Cycle Register (CS_number = 0)</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE0</name>
<description>SMC Mode Register (CS_number = 0)</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10000003</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FROZEN</name>
<description>Frozen Mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>READY</name>
<description>Ready Mode</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>4_BYTE</name>
<description>4-byte page</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BYTE</name>
<description>8-byte page</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BYTE</name>
<description>16-byte page</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32_BYTE</name>
<description>32-byte page</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SETUP1</name>
<description>SMC Setup Register (CS_number = 1)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE1</name>
<description>SMC Pulse Register (CS_number = 1)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE1</name>
<description>SMC Cycle Register (CS_number = 1)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE1</name>
<description>SMC Mode Register (CS_number = 1)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10000003</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FROZEN</name>
<description>Frozen Mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>READY</name>
<description>Ready Mode</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>4_BYTE</name>
<description>4-byte page</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BYTE</name>
<description>8-byte page</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BYTE</name>
<description>16-byte page</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32_BYTE</name>
<description>32-byte page</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SETUP2</name>
<description>SMC Setup Register (CS_number = 2)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE2</name>
<description>SMC Pulse Register (CS_number = 2)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE2</name>
<description>SMC Cycle Register (CS_number = 2)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE2</name>
<description>SMC Mode Register (CS_number = 2)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10000003</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FROZEN</name>
<description>Frozen Mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>READY</name>
<description>Ready Mode</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>4_BYTE</name>
<description>4-byte page</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BYTE</name>
<description>8-byte page</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BYTE</name>
<description>16-byte page</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32_BYTE</name>
<description>32-byte page</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SETUP3</name>
<description>SMC Setup Register (CS_number = 3)</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE3</name>
<description>SMC Pulse Register (CS_number = 3)</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE3</name>
<description>SMC Cycle Register (CS_number = 3)</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE3</name>
<description>SMC Mode Register (CS_number = 3)</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10000003</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FROZEN</name>
<description>Frozen Mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>READY</name>
<description>Ready Mode</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>4_BYTE</name>
<description>4-byte page</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BYTE</name>
<description>8-byte page</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BYTE</name>
<description>16-byte page</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32_BYTE</name>
<description>32-byte page</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>OCMS</name>
<description>SMC OCMS MODE Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMSE</name>
<description>Static Memory Controller Scrambling Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CS0SE</name>
<description>Chip Select (x = 0 to 3) Scrambling Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CS1SE</name>
<description>Chip Select (x = 0 to 3) Scrambling Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CS2SE</name>
<description>Chip Select (x = 0 to 3) Scrambling Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CS3SE</name>
<description>Chip Select (x = 0 to 3) Scrambling Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>KEY1</name>
<description>SMC OCMS KEY1 Register</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY1</name>
<description>Off Chip Memory Scrambling (OCMS) Key Part 1</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>KEY2</name>
<description>SMC OCMS KEY2 Register</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY2</name>
<description>Off Chip Memory Scrambling (OCMS) Key Part 2</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>SMC Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>SMC Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MATRIX</name>
<version>6499A</version>
<description>AHB Bus Matrix</description>
<baseAddress>0x400E0200</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>MATRIX_MCFG[%s]</name>
<description>Master Configuration Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>ULBT</name>
<description>Undefined Length Burst Type</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-4</dimIndex>
<name>MATRIX_SCFG[%s]</name>
<description>Slave Configuration Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>SLOT_CYCLE</name>
<description>Maximum Number of Allowed Cycles for a Burst</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DEFMSTR_TYPE</name>
<description>Default Master Type</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIXED_DEFMSTR</name>
<description>Fixed Default Master</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ARBT</name>
<description>Arbitration Type</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_PRAS0</name>
<description>Priority Register A for Slave 0</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_PRAS1</name>
<description>Priority Register A for Slave 1</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_PRAS2</name>
<description>Priority Register A for Slave 2</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_PRAS3</name>
<description>Priority Register A for Slave 3</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_PRAS4</name>
<description>Priority Register A for Slave 4</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCFG_SYSIO</name>
<description>System I/O Configuration register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYSIO4</name>
<description>PB4 or TDI Assignment</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO5</name>
<description>PB5 or TDO/TRACESWO Assignment</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO6</name>
<description>PB6 or TMS/SWDIO Assignment</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO7</name>
<description>PB7 or TCK/SWCLK Assignment</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO10</name>
<description>PB10 or DDM Assignment</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO11</name>
<description>PB11 or DDP Assignment</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SYSIO12</name>
<description>PB12 or ERASE Assignment</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCFG_SMCNFCS</name>
<description>SMC Chip Select NAND Flash Assignment Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMC_NFCS0</name>
<description>SMC NAND Flash Chip Select 0 Assignment</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SMC_NFCS1</name>
<description>SMC NAND Flash Chip Select 1 Assignment</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SMC_NFCS2</name>
<description>SMC NAND Flash Chip Select 2 Assignment</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SMC_NFCS3</name>
<description>SMC NAND Flash Chip Select 3 Assignment</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000001E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect ENable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY (Write-only)</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MATRIX_WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000001E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PMC</name>
<version>11116I</version>
<description>Power Management Controller</description>
<baseAddress>0x400E0400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x140</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PMC</name>
<value>5</value>
</interrupt>
<registers>
<register>
<name>PMC_SCER</name>
<description>System Clock Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>UDP</name>
<description>USB Device Port Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK2</name>
<description>Programmable Clock 2 Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SCDR</name>
<description>System Clock Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>UDP</name>
<description>USB Device Port Clock Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK2</name>
<description>Programmable Clock 2 Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SCSR</name>
<description>System Clock Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>UDP</name>
<description>USB Device Port Clock Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCK2</name>
<description>Programmable Clock 2 Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCER0</name>
<description>Peripheral Clock Enable Register 0</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCDR0</name>
<description>Peripheral Clock Disable Register 0</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCSR0</name>
<description>Peripheral Clock Status Register 0</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CKGR_MOR</name>
<description>Main Oscillator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000008</resetValue>
<fields>
<field>
<name>MOSCXTEN</name>
<description>Main Crystal Oscillator Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MOSCXTBY</name>
<description>Main Crystal Oscillator Bypass</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MOSCRCEN</name>
<description>Main On-Chip RC Oscillator Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MOSCRCF</name>
<description>Main On-Chip RC Oscillator Frequency Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>4_MHz</name>
<description>The Fast RC Oscillator Frequency is at 4 MHz (default)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8_MHz</name>
<description>The Fast RC Oscillator Frequency is at 8 MHz</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>12_MHz</name>
<description>The Fast RC Oscillator Frequency is at 12 MHz</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MOSCXTST</name>
<description>Main Crystal Oscillator Start-up Time</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>KEY</name>
<description>Write Access Password</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation.Always reads as 0.</description>
<value>0x37</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MOSCSEL</name>
<description>Main Oscillator Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CFDEN</name>
<description>Clock Failure Detector Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CKGR_MCFR</name>
<description>Main Clock Frequency Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAINF</name>
<description>Main Clock Frequency</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MAINFRDY</name>
<description>Main Clock Ready</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CKGR_PLLAR</name>
<description>PLLA Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00003F00</resetValue>
<fields>
<field>
<name>DIVA</name>
<description>Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLACOUNT</name>
<description>PLLA Counter</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MULA</name>
<description>PLLA Multiplier</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CKGR_PLLBR</name>
<description>PLLB Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00003F00</resetValue>
<fields>
<field>
<name>DIVB</name>
<description>Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLBCOUNT</name>
<description>PLLB Counter</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MULB</name>
<description>PLLB Multiplier</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_MCKR</name>
<description>Master Clock Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>CSS</name>
<description>Master Clock Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SLOW_CLK</name>
<description>Slow Clock is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MAIN_CLK</name>
<description>Main Clock is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PLLA_CLK</name>
<description>PLLA Clock is selected</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PLLB_CLK</name>
<description>PLLBClock is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRES</name>
<description>Processor Clock Prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CLK_1</name>
<description>Selected clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_2</name>
<description>Selected clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_4</name>
<description>Selected clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_8</name>
<description>Selected clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_16</name>
<description>Selected clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_32</name>
<description>Selected clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_64</name>
<description>Selected clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_3</name>
<description>Selected clock divided by 3</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PLLADIV2</name>
<description>PLLA Divisor by 2</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLBDIV2</name>
<description>PLLB Divisor by 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_USB</name>
<description>USB Clock Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USBS</name>
<description>USB Input Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBDIV</name>
<description>Divider for USB Clock.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-2</dimIndex>
<name>PMC_PCK[%s]</name>
<description>Programmable Clock 0 Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CSS</name>
<description>Master Clock Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SLOW_CLK</name>
<description>Slow Clock is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MAIN_CLK</name>
<description>Main Clock is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PLLA_CLK</name>
<description>PLLA Clock is selected</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PLLB_CLK</name>
<description>PLLB Clock is selected</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock is selected</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRES</name>
<description>Programmable Clock Prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CLK_1</name>
<description>Selected clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_2</name>
<description>Selected clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_4</name>
<description>Selected clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_8</name>
<description>Selected clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_16</name>
<description>Selected clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_32</name>
<description>Selected clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_64</name>
<description>Selected clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PMC_IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MOSCXTS</name>
<description>Main Crystal Oscillator Status Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKB</name>
<description>PLLB Lock Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY2</name>
<description>Programmable Clock Ready 2 Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MOSCSELS</name>
<description>Main Oscillator Selection Status Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MOSCRCS</name>
<description>Main On-Chip RC Status Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CFDEV</name>
<description>Clock Failure Detector Event Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MOSCXTS</name>
<description>Main Crystal Oscillator Status Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKB</name>
<description>PLLB Lock Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY2</name>
<description>Programmable Clock Ready 2 Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MOSCSELS</name>
<description>Main Oscillator Selection Status Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MOSCRCS</name>
<description>Main On-Chip RC Status Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CFDEV</name>
<description>Clock Failure Detector Event Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SR</name>
<description>Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00010008</resetValue>
<fields>
<field>
<name>MOSCXTS</name>
<description>Main XTAL Oscillator Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKB</name>
<description>PLLB Lock Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OSCSELS</name>
<description>Slow Clock Oscillator Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY2</name>
<description>Programmable Clock Ready Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MOSCSELS</name>
<description>Main Oscillator Selection Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MOSCRCS</name>
<description>Main On-Chip RC Oscillator Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CFDEV</name>
<description>Clock Failure Detector Event</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CFDS</name>
<description>Clock Failure Detector Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FOS</name>
<description>Clock Failure Detector Fault Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MOSCXTS</name>
<description>Main Crystal Oscillator Status Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKB</name>
<description>PLLB Lock Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY2</name>
<description>Programmable Clock Ready 2 Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MOSCSELS</name>
<description>Main Oscillator Selection Status Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MOSCRCS</name>
<description>Main On-Chip RC Status Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CFDEV</name>
<description>Clock Failure Detector Event Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_FSMR</name>
<description>Fast Start-up Mode Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FSTT0</name>
<description>Fast Start-up Input Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT1</name>
<description>Fast Start-up Input Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT2</name>
<description>Fast Start-up Input Enable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT3</name>
<description>Fast Start-up Input Enable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT4</name>
<description>Fast Start-up Input Enable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT5</name>
<description>Fast Start-up Input Enable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT6</name>
<description>Fast Start-up Input Enable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT7</name>
<description>Fast Start-up Input Enable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT8</name>
<description>Fast Start-up Input Enable 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT9</name>
<description>Fast Start-up Input Enable 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT10</name>
<description>Fast Start-up Input Enable 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT11</name>
<description>Fast Start-up Input Enable 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT12</name>
<description>Fast Start-up Input Enable 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT13</name>
<description>Fast Start-up Input Enable 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT14</name>
<description>Fast Start-up Input Enable 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTT15</name>
<description>Fast Start-up Input Enable 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTAL</name>
<description>RTT Alarm Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTCAL</name>
<description>RTC Alarm Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBAL</name>
<description>USB Alarm Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LPM</name>
<description>Low Power Mode</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_FSPR</name>
<description>Fast Start-up Polarity Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FSTP0</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP1</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP2</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP3</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP4</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP5</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP6</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP7</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP8</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP9</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP10</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP11</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP12</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP13</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP14</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSTP15</name>
<description>Fast Start-up Input Polarityx</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_FOCR</name>
<description>Fault Output Clear Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FOCLR</name>
<description>Fault Output Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x504D43</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PMC_WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCER1</name>
<description>Peripheral Clock Enable Register 1</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID32</name>
<description>Peripheral Clock 32 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID33</name>
<description>Peripheral Clock 33 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID34</name>
<description>Peripheral Clock 34 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCDR1</name>
<description>Peripheral Clock Disable Register 1</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID32</name>
<description>Peripheral Clock 32 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID33</name>
<description>Peripheral Clock 33 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID34</name>
<description>Peripheral Clock 34 Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCSR1</name>
<description>Peripheral Clock Status Register 1</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PID32</name>
<description>Peripheral Clock 32 Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID33</name>
<description>Peripheral Clock 33 Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID34</name>
<description>Peripheral Clock 34 Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_OCR</name>
<description>Oscillator Calibration Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00404040</resetValue>
<fields>
<field>
<name>CAL4</name>
<description>RC Oscillator Calibration bits for 4 MHz</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SEL4</name>
<description>Selection of RC Oscillator Calibration bits for 4 MHz</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAL8</name>
<description>RC Oscillator Calibration bits for 8 MHz</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SEL8</name>
<description>Selection of RC Oscillator Calibration bits for 8 MHz</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAL12</name>
<description>RC Oscillator Calibration bits for 12 MHz</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SEL12</name>
<description>Selection of RC Oscillator Calibration bits for 12 MHz</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>UART0</name>
<version>6418H</version>
<description>Universal Asynchronous Receiver Transmitter 0</description>
<groupName>UART</groupName>
<prependToName>UART0_</prependToName>
<baseAddress>0x400E0600</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x128</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>UART0</name>
<value>8</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even Parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd Parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Space: parity forced to 0</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Mark: parity forced to 1</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No Parity</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Enable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Enable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Enable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Enable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Enable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Enable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Enable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Enable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Enable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Enable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Disable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Disable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Disable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Disable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Disable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Disable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Disable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Disable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Disable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>Mask RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Mask End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Mask End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Mask Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Mask Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Mask Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Mask TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Mask TXBUFE Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Mask RXBUFF Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divisor</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CHIPID</name>
<version>6417P</version>
<description>Chip Identifier</description>
<prependToName>CHIPID_</prependToName>
<baseAddress>0x400E0740</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CIDR</name>
<description>Chip ID Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>VERSION</name>
<description>Version of the Device</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPROC</name>
<description>Embedded Processor</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>ARM946ES</name>
<description>ARM946ES</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ARM7TDMI</name>
<description>ARM7TDMI</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CM3</name>
<description>Cortex-M3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>ARM920T</name>
<description>ARM920T</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>ARM926EJS</name>
<description>ARM926EJS</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CA5</name>
<description>Cortex-A5</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CM4</name>
<description>Cortex-M4</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NVPSIZ</name>
<description>Nonvolatile Program Memory Size</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8K</name>
<description>8 Kbytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16K</name>
<description>16 Kbytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32K</name>
<description>32 Kbytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>64K</name>
<description>64 Kbytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>128K</name>
<description>128 Kbytes</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>256K</name>
<description>256 Kbytes</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>512K</name>
<description>512 Kbytes</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>1024K</name>
<description>1024 Kbytes</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>2048K</name>
<description>2048 Kbytes</description>
<value>0xE</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NVPSIZ2</name>
<description>Second Nonvolatile Program Memory Size</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8K</name>
<description>8 Kbytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>16K</name>
<description>16 Kbytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32K</name>
<description>32 Kbytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>64K</name>
<description>64 Kbytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>128K</name>
<description>128 Kbytes</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>256K</name>
<description>256 Kbytes</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>512K</name>
<description>512 Kbytes</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>1024K</name>
<description>1024 Kbytes</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>2048K</name>
<description>2048 Kbytes</description>
<value>0xE</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRAMSIZ</name>
<description>Internal SRAM Size</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>48K</name>
<description>48 Kbytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>192K</name>
<description>192 Kbytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2K</name>
<description>2 Kbytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>6K</name>
<description>6 Kbytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>24K</name>
<description>24 Kbytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4K</name>
<description>4 Kbytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>80K</name>
<description>80 Kbytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>160K</name>
<description>160 Kbytes</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>8K</name>
<description>8 Kbytes</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>16K</name>
<description>16 Kbytes</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>32K</name>
<description>32 Kbytes</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>64K</name>
<description>64 Kbytes</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>128K</name>
<description>128 Kbytes</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>256K</name>
<description>256 Kbytes</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
<name>96K</name>
<description>96 Kbytes</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>512K</name>
<description>512 Kbytes</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ARCH</name>
<description>Architecture Identifier</description>
<bitOffset>20</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>AT91SAM9xx</name>
<description>AT91SAM9xx Series</description>
<value>0x19</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM9XExx</name>
<description>AT91SAM9XExx Series</description>
<value>0x29</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x34</name>
<description>AT91x34 Series</description>
<value>0x34</value>
</enumeratedValue>
<enumeratedValue>
<name>CAP7</name>
<description>CAP7 Series</description>
<value>0x37</value>
</enumeratedValue>
<enumeratedValue>
<name>CAP9</name>
<description>CAP9 Series</description>
<value>0x39</value>
</enumeratedValue>
<enumeratedValue>
<name>CAP11</name>
<description>CAP11 Series</description>
<value>0x3B</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x40</name>
<description>AT91x40 Series</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x42</name>
<description>AT91x42 Series</description>
<value>0x42</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM4SH2</name>
<description>AT91SAM4SH2 Series</description>
<value>0x45</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x55</name>
<description>AT91x55 Series</description>
<value>0x55</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7Axx</name>
<description>AT91SAM7Axx Series</description>
<value>0x60</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7AQxx</name>
<description>AT91SAM7AQxx Series</description>
<value>0x61</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x63</name>
<description>AT91x63 Series</description>
<value>0x63</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM4CxxC</name>
<description>SAM4CxC Series (100-pin version)</description>
<value>0x64</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7Sxx</name>
<description>AT91SAM7Sxx Series</description>
<value>0x70</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7XCxx</name>
<description>AT91SAM7XCxx Series</description>
<value>0x71</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7SExx</name>
<description>AT91SAM7SExx Series</description>
<value>0x72</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7Lxx</name>
<description>AT91SAM7Lxx Series</description>
<value>0x73</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7Xxx</name>
<description>AT91SAM7Xxx Series</description>
<value>0x75</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91SAM7SLxx</name>
<description>AT91SAM7SLxx Series</description>
<value>0x76</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3UxC</name>
<description>SAM3UxC Series (100-pin version)</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3UxE</name>
<description>SAM3UxE Series (144-pin version)</description>
<value>0x81</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3AxC</name>
<description>SAM3AxC Series (100-pin version)</description>
<value>0x83</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3XxC</name>
<description>SAM3XxC Series (100-pin version)</description>
<value>0x84</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3XxE</name>
<description>SAM3XxE Series (144-pin version)</description>
<value>0x85</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3XxG</name>
<description>SAM3XxG Series (208/217-pin version)</description>
<value>0x86</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3SxA</name>
<description>SAM3SxASeries (48-pin version)</description>
<value>0x88</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3SxB</name>
<description>SAM3SxB Series (64-pin version)</description>
<value>0x89</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3SxC</name>
<description>SAM3SxC Series (100-pin version)</description>
<value>0x8A</value>
</enumeratedValue>
<enumeratedValue>
<name>AT91x92</name>
<description>AT91x92 Series</description>
<value>0x92</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3SDxB</name>
<description>SAM3SDxB Series (64-pin version)</description>
<value>0x99</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM3SDxC</name>
<description>SAM3SDxC Series (100-pin version)</description>
<value>0x9A</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM5A</name>
<description>SAM5A</description>
<value>0xA5</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM4LxA</name>
<description>SAM4LxA Series (48-pin version)</description>
<value>0xB0</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM4LxB</name>
<description>SAM4LxB Series (64-pin version)</description>
<value>0xB1</value>
</enumeratedValue>
<enumeratedValue>
<name>SAM4LxC</name>
<description>SAM4LxC Series (100-pin version)</description>
<value>0xB2</value>
</enumeratedValue>
<enumeratedValue>
<name>AT75Cxx</name>
<description>AT75Cxx Series</description>
<value>0xF0</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NVPTYP</name>
<description>Nonvolatile Program Memory Type</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>ROM</name>
<description>ROM</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ROMLESS</name>
<description>ROMless or on-chip Flash</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FLASH</name>
<description>Embedded Flash Memory</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ROM_FLASH</name>
<description>ROM and Embedded Flash Memory- NVPSIZ is ROM size- NVPSIZ2 is Flash size</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>SRAM</name>
<description>SRAM emulating ROM</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EXT</name>
<description>Extension Flag</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EXID</name>
<description>Chip ID Extension Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>EXID</name>
<description>Chip ID Extension</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>UART1</name>
<version>6418H</version>
<description>Universal Asynchronous Receiver Transmitter 1</description>
<groupName>UART</groupName>
<prependToName>UART1_</prependToName>
<baseAddress>0x400E0800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x128</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>UART1</name>
<value>9</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even Parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd Parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Space: parity forced to 0</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Mark: parity forced to 1</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No Parity</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Enable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Enable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Enable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Enable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Enable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Enable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Enable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Enable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Enable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Enable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Disable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Disable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Disable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Disable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Disable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Disable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Disable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Disable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Disable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>Mask RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Mask End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Mask End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Mask Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Mask Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Mask Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Mask TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Mask TXBUFE Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Mask RXBUFF Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divisor</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EFC</name>
<version>6450J</version>
<description>Embedded Flash Controller</description>
<prependToName>EFC_</prependToName>
<baseAddress>0x400E0A00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EFC</name>
<value>6</value>
</interrupt>
<registers>
<register>
<name>FMR</name>
<description>EEFC Flash Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRDY</name>
<description>Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FWS</name>
<description>Flash Wait State</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCOD</name>
<description>Sequential Code Optimization Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FAM</name>
<description>Flash Access Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FCR</name>
<description>EEFC Flash Command Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FCMD</name>
<description>Flash Command</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>GETD</name>
<description>Get Flash Descriptor</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>WP</name>
<description>Write page</description>
<value>0x01</value>
</enumeratedValue>
<enumeratedValue>
<name>WPL</name>
<description>Write page and lock</description>
<value>0x02</value>
</enumeratedValue>
<enumeratedValue>
<name>EWP</name>
<description>Erase page and write page</description>
<value>0x03</value>
</enumeratedValue>
<enumeratedValue>
<name>EWPL</name>
<description>Erase page and write page then lock</description>
<value>0x04</value>
</enumeratedValue>
<enumeratedValue>
<name>EA</name>
<description>Erase all</description>
<value>0x05</value>
</enumeratedValue>
<enumeratedValue>
<name>SLB</name>
<description>Set Lock Bit</description>
<value>0x08</value>
</enumeratedValue>
<enumeratedValue>
<name>CLB</name>
<description>Clear Lock Bit</description>
<value>0x09</value>
</enumeratedValue>
<enumeratedValue>
<name>GLB</name>
<description>Get Lock Bit</description>
<value>0x0A</value>
</enumeratedValue>
<enumeratedValue>
<name>SGPB</name>
<description>Set GPNVM Bit</description>
<value>0x0B</value>
</enumeratedValue>
<enumeratedValue>
<name>CGPB</name>
<description>Clear GPNVM Bit</description>
<value>0x0C</value>
</enumeratedValue>
<enumeratedValue>
<name>GGPB</name>
<description>Get GPNVM Bit</description>
<value>0x0D</value>
</enumeratedValue>
<enumeratedValue>
<name>STUI</name>
<description>Start Read Unique Identifier</description>
<value>0x0E</value>
</enumeratedValue>
<enumeratedValue>
<name>SPUI</name>
<description>Stop Read Unique Identifier</description>
<value>0x0F</value>
</enumeratedValue>
<enumeratedValue>
<name>GCALB</name>
<description>Get CALIB Bit</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FARG</name>
<description>Flash Command Argument</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FKEY</name>
<description>Flash Writing Protection Key</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>The 0x5A value enables the command defined by the bits of the register. If the field is written with a different value, the write is not performed and no action is started.</description>
<value>0x5A</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FSR</name>
<description>EEFC Flash Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>FRDY</name>
<description>Flash Ready Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FCMDE</name>
<description>Flash Command Error Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FLOCKE</name>
<description>Flash Lock Error Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FRR</name>
<description>EEFC Flash Result Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FVALUE</name>
<description>Flash Result Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOA</name>
<version>11004J</version>
<description>Parallel Input/Output Controller A</description>
<groupName>PIO</groupName>
<prependToName>PIOA_</prependToName>
<baseAddress>0x400E0E00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOA</name>
<value>11</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>ABCDSR[%s]</name>
<description>Peripheral Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Peripheral Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Peripheral Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Peripheral Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Peripheral Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Peripheral Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Peripheral Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Peripheral Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Peripheral Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Peripheral Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Peripheral Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Peripheral Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Peripheral Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Peripheral Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Peripheral Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Peripheral Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Peripheral Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Peripheral Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Peripheral Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Peripheral Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Peripheral Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Peripheral Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Peripheral Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Peripheral Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Peripheral Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Peripheral Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Peripheral Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Peripheral Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Peripheral Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Peripheral Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Peripheral Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Peripheral Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IFSCDR</name>
<description>Input Filter Slow Clock Disable Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCER</name>
<description>Input Filter Slow Clock Enable Register</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCSR</name>
<description>Input Filter Slow Clock Status Register</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCDR</name>
<description>Slow Clock Divider Debouncing Register</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Slow Clock Divider Selection for Debouncing</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PPDDR</name>
<description>Pad Pull-down Disable Register</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDER</name>
<description>Pad Pull-down Enable Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDSR</name>
<description>Pad Pull-down Status Register</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>AIMER</name>
<description>Additional Interrupt Modes Enable Register</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMDR</name>
<description>Additional Interrupt Modes Disables Register</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMMR</name>
<description>Additional Interrupt Modes Mask Register</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral CD Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral CD Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral CD Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral CD Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral CD Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral CD Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral CD Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral CD Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral CD Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral CD Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral CD Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral CD Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral CD Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral CD Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral CD Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral CD Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral CD Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral CD Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral CD Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral CD Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral CD Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral CD Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral CD Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral CD Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral CD Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral CD Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral CD Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral CD Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral CD Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral CD Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral CD Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral CD Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ESR</name>
<description>Edge Select Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Edge Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Edge Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Edge Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Edge Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Edge Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Edge Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Edge Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Edge Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Edge Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Edge Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Edge Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Edge Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Edge Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Edge Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Edge Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Edge Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Edge Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Edge Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Edge Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Edge Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Edge Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Edge Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Edge Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Edge Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Edge Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Edge Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Edge Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Edge Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Edge Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Edge Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Edge Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Edge Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LSR</name>
<description>Level Select Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ELSR</name>
<description>Edge/Level Status Register</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FELLSR</name>
<description>Falling Edge/Low Level Select Register</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>REHLSR</name>
<description>Rising Edge/ High Level Select Register</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FRLHSR</name>
<description>Fall/Rise - Low/High Status Register</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY.</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x50494F</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCHMITT</name>
<description>Schmitt Trigger Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCHMITT0</name>
<description>Schmitt Trigger Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT1</name>
<description>Schmitt Trigger Control</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT2</name>
<description>Schmitt Trigger Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT3</name>
<description>Schmitt Trigger Control</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT4</name>
<description>Schmitt Trigger Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT5</name>
<description>Schmitt Trigger Control</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT6</name>
<description>Schmitt Trigger Control</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT7</name>
<description>Schmitt Trigger Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT8</name>
<description>Schmitt Trigger Control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT9</name>
<description>Schmitt Trigger Control</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT10</name>
<description>Schmitt Trigger Control</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT11</name>
<description>Schmitt Trigger Control</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT12</name>
<description>Schmitt Trigger Control</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT13</name>
<description>Schmitt Trigger Control</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT14</name>
<description>Schmitt Trigger Control</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT15</name>
<description>Schmitt Trigger Control</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT16</name>
<description>Schmitt Trigger Control</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT17</name>
<description>Schmitt Trigger Control</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT18</name>
<description>Schmitt Trigger Control</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT19</name>
<description>Schmitt Trigger Control</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT20</name>
<description>Schmitt Trigger Control</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT21</name>
<description>Schmitt Trigger Control</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT22</name>
<description>Schmitt Trigger Control</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT23</name>
<description>Schmitt Trigger Control</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT24</name>
<description>Schmitt Trigger Control</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT25</name>
<description>Schmitt Trigger Control</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT26</name>
<description>Schmitt Trigger Control</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT27</name>
<description>Schmitt Trigger Control</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT28</name>
<description>Schmitt Trigger Control</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT29</name>
<description>Schmitt Trigger Control</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT30</name>
<description>Schmitt Trigger Control</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT31</name>
<description>Schmitt Trigger Control</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000128</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOB</name>
<version>11004J</version>
<description>Parallel Input/Output Controller B</description>
<groupName>PIO</groupName>
<prependToName>PIOB_</prependToName>
<baseAddress>0x400E1000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOB</name>
<value>12</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>ABCDSR[%s]</name>
<description>Peripheral Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Peripheral Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Peripheral Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Peripheral Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Peripheral Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Peripheral Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Peripheral Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Peripheral Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Peripheral Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Peripheral Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Peripheral Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Peripheral Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Peripheral Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Peripheral Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Peripheral Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Peripheral Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Peripheral Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Peripheral Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Peripheral Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Peripheral Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Peripheral Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Peripheral Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Peripheral Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Peripheral Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Peripheral Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Peripheral Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Peripheral Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Peripheral Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Peripheral Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Peripheral Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Peripheral Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Peripheral Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IFSCDR</name>
<description>Input Filter Slow Clock Disable Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCER</name>
<description>Input Filter Slow Clock Enable Register</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCSR</name>
<description>Input Filter Slow Clock Status Register</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCDR</name>
<description>Slow Clock Divider Debouncing Register</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Slow Clock Divider Selection for Debouncing</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PPDDR</name>
<description>Pad Pull-down Disable Register</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDER</name>
<description>Pad Pull-down Enable Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDSR</name>
<description>Pad Pull-down Status Register</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>AIMER</name>
<description>Additional Interrupt Modes Enable Register</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMDR</name>
<description>Additional Interrupt Modes Disables Register</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMMR</name>
<description>Additional Interrupt Modes Mask Register</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral CD Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral CD Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral CD Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral CD Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral CD Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral CD Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral CD Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral CD Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral CD Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral CD Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral CD Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral CD Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral CD Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral CD Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral CD Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral CD Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral CD Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral CD Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral CD Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral CD Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral CD Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral CD Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral CD Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral CD Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral CD Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral CD Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral CD Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral CD Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral CD Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral CD Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral CD Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral CD Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ESR</name>
<description>Edge Select Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Edge Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Edge Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Edge Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Edge Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Edge Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Edge Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Edge Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Edge Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Edge Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Edge Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Edge Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Edge Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Edge Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Edge Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Edge Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Edge Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Edge Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Edge Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Edge Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Edge Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Edge Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Edge Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Edge Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Edge Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Edge Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Edge Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Edge Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Edge Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Edge Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Edge Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Edge Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Edge Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LSR</name>
<description>Level Select Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ELSR</name>
<description>Edge/Level Status Register</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FELLSR</name>
<description>Falling Edge/Low Level Select Register</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>REHLSR</name>
<description>Rising Edge/ High Level Select Register</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FRLHSR</name>
<description>Fall/Rise - Low/High Status Register</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY.</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x50494F</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCHMITT</name>
<description>Schmitt Trigger Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCHMITT0</name>
<description>Schmitt Trigger Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT1</name>
<description>Schmitt Trigger Control</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT2</name>
<description>Schmitt Trigger Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT3</name>
<description>Schmitt Trigger Control</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT4</name>
<description>Schmitt Trigger Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT5</name>
<description>Schmitt Trigger Control</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT6</name>
<description>Schmitt Trigger Control</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT7</name>
<description>Schmitt Trigger Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT8</name>
<description>Schmitt Trigger Control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT9</name>
<description>Schmitt Trigger Control</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT10</name>
<description>Schmitt Trigger Control</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT11</name>
<description>Schmitt Trigger Control</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT12</name>
<description>Schmitt Trigger Control</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT13</name>
<description>Schmitt Trigger Control</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT14</name>
<description>Schmitt Trigger Control</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT15</name>
<description>Schmitt Trigger Control</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT16</name>
<description>Schmitt Trigger Control</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT17</name>
<description>Schmitt Trigger Control</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT18</name>
<description>Schmitt Trigger Control</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT19</name>
<description>Schmitt Trigger Control</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT20</name>
<description>Schmitt Trigger Control</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT21</name>
<description>Schmitt Trigger Control</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT22</name>
<description>Schmitt Trigger Control</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT23</name>
<description>Schmitt Trigger Control</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT24</name>
<description>Schmitt Trigger Control</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT25</name>
<description>Schmitt Trigger Control</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT26</name>
<description>Schmitt Trigger Control</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT27</name>
<description>Schmitt Trigger Control</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT28</name>
<description>Schmitt Trigger Control</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT29</name>
<description>Schmitt Trigger Control</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT30</name>
<description>Schmitt Trigger Control</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT31</name>
<description>Schmitt Trigger Control</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOC</name>
<version>11004J</version>
<description>Parallel Input/Output Controller C</description>
<groupName>PIO</groupName>
<prependToName>PIOC_</prependToName>
<baseAddress>0x400E1200</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOC</name>
<value>13</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>ABCDSR[%s]</name>
<description>Peripheral Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Peripheral Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Peripheral Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Peripheral Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Peripheral Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Peripheral Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Peripheral Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Peripheral Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Peripheral Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Peripheral Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Peripheral Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Peripheral Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Peripheral Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Peripheral Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Peripheral Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Peripheral Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Peripheral Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Peripheral Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Peripheral Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Peripheral Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Peripheral Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Peripheral Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Peripheral Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Peripheral Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Peripheral Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Peripheral Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Peripheral Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Peripheral Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Peripheral Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Peripheral Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Peripheral Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Peripheral Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IFSCDR</name>
<description>Input Filter Slow Clock Disable Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Clock Glitch Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCER</name>
<description>Input Filter Slow Clock Enable Register</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Debouncing Filtering Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSCSR</name>
<description>Input Filter Slow Clock Status Register</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Glitch or Debouncing Filter Selection Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCDR</name>
<description>Slow Clock Divider Debouncing Register</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Slow Clock Divider Selection for Debouncing</description>
<bitOffset>0</bitOffset>
<bitWidth>14</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PPDDR</name>
<description>Pad Pull-down Disable Register</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDER</name>
<description>Pad Pull-down Enable Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PPDSR</name>
<description>Pad Pull-down Status Register</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Down Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Down Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Down Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Down Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Down Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Down Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Down Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Down Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Down Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Down Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Down Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Down Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Down Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Down Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Down Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Down Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Down Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Down Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Down Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Down Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Down Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Down Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Down Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Down Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Down Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Down Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Down Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Down Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Down Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Down Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Down Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Down Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>AIMER</name>
<description>Additional Interrupt Modes Enable Register</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMDR</name>
<description>Additional Interrupt Modes Disables Register</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Additional Interrupt Modes Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>AIMMR</name>
<description>Additional Interrupt Modes Mask Register</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral CD Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral CD Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral CD Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral CD Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral CD Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral CD Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral CD Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral CD Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral CD Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral CD Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral CD Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral CD Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral CD Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral CD Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral CD Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral CD Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral CD Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral CD Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral CD Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral CD Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral CD Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral CD Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral CD Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral CD Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral CD Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral CD Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral CD Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral CD Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral CD Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral CD Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral CD Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral CD Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ESR</name>
<description>Edge Select Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Edge Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Edge Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Edge Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Edge Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Edge Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Edge Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Edge Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Edge Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Edge Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Edge Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Edge Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Edge Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Edge Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Edge Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Edge Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Edge Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Edge Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Edge Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Edge Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Edge Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Edge Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Edge Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Edge Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Edge Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Edge Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Edge Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Edge Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Edge Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Edge Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Edge Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Edge Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Edge Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LSR</name>
<description>Level Select Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ELSR</name>
<description>Edge/Level Status Register</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge/Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FELLSR</name>
<description>Falling Edge/Low Level Select Register</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Falling Edge/Low Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>REHLSR</name>
<description>Rising Edge/ High Level Select Register</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Rising Edge /High Level Interrupt Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FRLHSR</name>
<description>Fall/Rise - Low/High Status Register</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Edge /Level Interrupt Source Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY.</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation of the WPEN bit. Always reads as 0.</description>
<value>0x50494F</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCHMITT</name>
<description>Schmitt Trigger Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCHMITT0</name>
<description>Schmitt Trigger Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT1</name>
<description>Schmitt Trigger Control</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT2</name>
<description>Schmitt Trigger Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT3</name>
<description>Schmitt Trigger Control</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT4</name>
<description>Schmitt Trigger Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT5</name>
<description>Schmitt Trigger Control</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT6</name>
<description>Schmitt Trigger Control</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT7</name>
<description>Schmitt Trigger Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT8</name>
<description>Schmitt Trigger Control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT9</name>
<description>Schmitt Trigger Control</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT10</name>
<description>Schmitt Trigger Control</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT11</name>
<description>Schmitt Trigger Control</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT12</name>
<description>Schmitt Trigger Control</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT13</name>
<description>Schmitt Trigger Control</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT14</name>
<description>Schmitt Trigger Control</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT15</name>
<description>Schmitt Trigger Control</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT16</name>
<description>Schmitt Trigger Control</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT17</name>
<description>Schmitt Trigger Control</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT18</name>
<description>Schmitt Trigger Control</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT19</name>
<description>Schmitt Trigger Control</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT20</name>
<description>Schmitt Trigger Control</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT21</name>
<description>Schmitt Trigger Control</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT22</name>
<description>Schmitt Trigger Control</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT23</name>
<description>Schmitt Trigger Control</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT24</name>
<description>Schmitt Trigger Control</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT25</name>
<description>Schmitt Trigger Control</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT26</name>
<description>Schmitt Trigger Control</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT27</name>
<description>Schmitt Trigger Control</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT28</name>
<description>Schmitt Trigger Control</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT29</name>
<description>Schmitt Trigger Control</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT30</name>
<description>Schmitt Trigger Control</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCHMITT31</name>
<description>Schmitt Trigger Control</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RSTC</name>
<version>11009C</version>
<description>Reset Controller</description>
<groupName>SYSC</groupName>
<prependToName>RSTC_</prependToName>
<baseAddress>0x400E1400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PROCRST</name>
<description>Processor Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PERRST</name>
<description>Peripheral Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EXTRST</name>
<description>External Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEY</name>
<description>System Reset Key</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>URSTS</name>
<description>User Reset Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RSTTYP</name>
<description>Reset Type</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NRSTL</name>
<description>NRST Pin Level</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRCMP</name>
<description>Software Reset Command in Progress</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>URSTEN</name>
<description>User Reset Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>URSTIEN</name>
<description>User Reset Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ERSTL</name>
<description>External Reset Length</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SUPC</name>
<version>6452S</version>
<description>Supply Controller</description>
<groupName>SYSC</groupName>
<prependToName>SUPC_</prependToName>
<baseAddress>0x400E1410</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Supply Controller Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>VROFF</name>
<description>Voltage Regulator Off</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_EFFECT</name>
<description>no effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP_VREG</name>
<description>if KEY is correct, asserts the vddcore_nreset and stops the voltage regulator.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>XTALSEL</name>
<description>Crystal Oscillator Select</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_EFFECT</name>
<description>no effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CRYSTAL_SEL</name>
<description>if KEY is correct, switches the slow clock on the crystal oscillator output.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation.</description>
<value>0xA5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SMMR</name>
<description>Supply Controller Supply Monitor Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMTH</name>
<description>Supply Monitor Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SMSMPL</name>
<description>Supply Monitor Sampling Period</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SMD</name>
<description>Supply Monitor disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CSM</name>
<description>Continuous Supply Monitor</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32SLCK</name>
<description>Supply Monitor enabled one SLCK period every 32 SLCK periods</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256SLCK</name>
<description>Supply Monitor enabled one SLCK period every 256 SLCK periods</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>2048SLCK</name>
<description>Supply Monitor enabled one SLCK period every 2,048 SLCK periods</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMRSTEN</name>
<description>Supply Monitor Reset Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMIEN</name>
<description>Supply Monitor Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the SUPC interrupt signal is not affected when a supply monitor detection occurs.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the SUPC interrupt signal is asserted when a supply monitor detection occurs.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Supply Controller Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00005A00</resetValue>
<fields>
<field>
<name>BODRSTEN</name>
<description>Brownout Detector Reset Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the core reset signal, vddcore_nreset is asserted when a brownout detection occurs.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BODDIS</name>
<description>Brownout Detector Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ENABLE</name>
<description>the core brownout detector is enabled.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DISABLE</name>
<description>the core brownout detector is disabled.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ONREG</name>
<description>Voltage Regulator enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ONREG_UNUSED</name>
<description>Internal voltage regulator is not used (external power supply is used)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ONREG_USED</name>
<description>internal voltage regulator is used</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OSCBYPASS</name>
<description>Oscillator Bypass</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_EFFECT</name>
<description>no effect. Clock selection depends on XTALSEL value.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>BYPASS</name>
<description>the 32-KHz XTAL oscillator is selected and is put in bypass mode.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEY</name>
<description>Password Key</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation.</description>
<value>0xA5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WUMR</name>
<description>Supply Controller Wake-up Mode Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMEN</name>
<description>Supply Monitor Wake-up Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the supply monitor detection has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the supply monitor detection forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RTTEN</name>
<description>Real Time Timer Wake-up Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the RTT alarm signal has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the RTT alarm signal forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RTCEN</name>
<description>Real Time Clock Wake-up Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NOT_ENABLE</name>
<description>the RTC alarm signal has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the RTC alarm signal forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPDBC</name>
<description>Wake-up Inputs Debouncer Period</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>IMMEDIATE</name>
<description>Immediate, no debouncing, detected active at least on one Slow Clock edge.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>3_SCLK</name>
<description>WKUPx shall be in its active state for at least 3 SLCK periods</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32_SCLK</name>
<description>WKUPx shall be in its active state for at least 32 SLCK periods</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>512_SCLK</name>
<description>WKUPx shall be in its active state for at least 512 SLCK periods</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>4096_SCLK</name>
<description>WKUPx shall be in its active state for at least 4,096 SLCK periods</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>32768_SCLK</name>
<description>WKUPx shall be in its active state for at least 32,768 SLCK periods</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WUIR</name>
<description>Supply Controller Wake-up Inputs Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WKUPEN0</name>
<description>Wake-up Input Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN1</name>
<description>Wake-up Input Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN2</name>
<description>Wake-up Input Enable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN3</name>
<description>Wake-up Input Enable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN4</name>
<description>Wake-up Input Enable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN5</name>
<description>Wake-up Input Enable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN6</name>
<description>Wake-up Input Enable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN7</name>
<description>Wake-up Input Enable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN8</name>
<description>Wake-up Input Enable 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN9</name>
<description>Wake-up Input Enable 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN10</name>
<description>Wake-up Input Enable 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN11</name>
<description>Wake-up Input Enable 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN12</name>
<description>Wake-up Input Enable 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN13</name>
<description>Wake-up Input Enable 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN14</name>
<description>Wake-up Input Enable 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPEN15</name>
<description>Wake-up Input Enable 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>DISABLE</name>
<description>the corresponding wake-up input has no wake-up effect.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT0</name>
<description>Wake-up Input Type 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT1</name>
<description>Wake-up Input Type 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT2</name>
<description>Wake-up Input Type 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT3</name>
<description>Wake-up Input Type 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT4</name>
<description>Wake-up Input Type 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT5</name>
<description>Wake-up Input Type 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT6</name>
<description>Wake-up Input Type 6</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT7</name>
<description>Wake-up Input Type 7</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT8</name>
<description>Wake-up Input Type 8</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT9</name>
<description>Wake-up Input Type 9</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT10</name>
<description>Wake-up Input Type 10</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT11</name>
<description>Wake-up Input Type 11</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT12</name>
<description>Wake-up Input Type 12</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT13</name>
<description>Wake-up Input Type 13</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT14</name>
<description>Wake-up Input Type 14</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPT15</name>
<description>Wake-up Input Type 15</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH_TO_LOW</name>
<description>a high to low level transition for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_TO_HIGH</name>
<description>a low to high level transition for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Supply Controller Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WKUPS</name>
<description>WKUP Wake-up Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO</name>
<description>no wake-up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESENT</name>
<description>at least one wake-up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMWS</name>
<description>Supply Monitor Detection Wake-up Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO</name>
<description>no wake-up due to a supply monitor detection has occurred since the last read of SUPC_SR.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESENT</name>
<description>at least one wake-up due to a supply monitor detection has occurred since the last read of SUPC_SR.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BODRSTS</name>
<description>Brownout Detector Reset Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO</name>
<description>no core brownout rising edge event has been detected since the last read of the SUPC_SR.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESENT</name>
<description>at least one brownout output rising edge event has been detected since the last read of the SUPC_SR.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMRSTS</name>
<description>Supply Monitor Reset Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO</name>
<description>no supply monitor detection has generated a core reset since the last read of the SUPC_SR.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESENT</name>
<description>at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMS</name>
<description>Supply Monitor Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO</name>
<description>no supply monitor detection since the last read of SUPC_SR.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESENT</name>
<description>at least one supply monitor detection since the last read of SUPC_SR.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SMOS</name>
<description>Supply Monitor Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>HIGH</name>
<description>the supply monitor detected VDDIO higher than its threshold at its last measurement.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>the supply monitor detected VDDIO lower than its threshold at its last measurement.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OSCSEL</name>
<description>32-kHz Oscillator Selection Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>RC</name>
<description>the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CRYST</name>
<description>the slow clock, SLCK is generated by the 32-kHz crystal oscillator.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS0</name>
<description>WKUP Input Status 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS1</name>
<description>WKUP Input Status 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS2</name>
<description>WKUP Input Status 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS3</name>
<description>WKUP Input Status 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS4</name>
<description>WKUP Input Status 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS5</name>
<description>WKUP Input Status 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS6</name>
<description>WKUP Input Status 6</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS7</name>
<description>WKUP Input Status 7</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS8</name>
<description>WKUP Input Status 8</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS9</name>
<description>WKUP Input Status 9</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS10</name>
<description>WKUP Input Status 10</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS11</name>
<description>WKUP Input Status 11</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS12</name>
<description>WKUP Input Status 12</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS13</name>
<description>WKUP Input Status 13</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS14</name>
<description>WKUP Input Status 14</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKUPIS15</name>
<description>WKUP Input Status 15</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DIS</name>
<description>the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EN</name>
<description>the corresponding wake-up input was active at the time the debouncer triggered a wake-up event.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTT</name>
<version>6081H</version>
<description>Real-time Timer</description>
<groupName>SYSC</groupName>
<prependToName>RTT_</prependToName>
<baseAddress>0x400E1430</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00008000</resetValue>
<fields>
<field>
<name>RTPRES</name>
<description>Real-time Timer Prescaler Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALMIEN</name>
<description>Alarm Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTINCIEN</name>
<description>Real-time Timer Increment Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTRST</name>
<description>Real-time Timer Restart</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>AR</name>
<description>Alarm Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ALMV</name>
<description>Alarm Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>VR</name>
<description>Value Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRTV</name>
<description>Current Real-time Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ALMS</name>
<description>Real-time Alarm Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTTINC</name>
<description>Real-time Timer Increment</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>WDT</name>
<version>6080F</version>
<description>Watchdog Timer</description>
<groupName>SYSC</groupName>
<prependToName>WDT_</prependToName>
<baseAddress>0x400E1450</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WDRSTT</name>
<description>Watchdog Restart</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEY</name>
<description>Password.</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PASSWD</name>
<description>Writing any other value in this field aborts the write operation.</description>
<value>0xA5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x3FFF2FFF</resetValue>
<fields>
<field>
<name>WDV</name>
<description>Watchdog Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDFIEN</name>
<description>Watchdog Fault Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRSTEN</name>
<description>Watchdog Reset Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRPROC</name>
<description>Watchdog Reset Processor</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDDIS</name>
<description>Watchdog Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDD</name>
<description>Watchdog Delta Value</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDDBGHLT</name>
<description>Watchdog Debug Halt</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDIDLEHLT</name>
<description>Watchdog Idle Halt</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDUNF</name>
<description>Watchdog Underflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WDERR</name>
<description>Watchdog Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTC</name>
<version>6056N</version>
<description>Real-time Clock</description>
<groupName>SYSC</groupName>
<prependToName>RTC_</prependToName>
<baseAddress>0x400E1460</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDTIM</name>
<description>Update Request Time Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPDCAL</name>
<description>Update Request Calendar Register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TIMEVSEL</name>
<description>Time Event Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MINUTE</name>
<description>Minute change</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOUR</name>
<description>Hour change</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MIDNIGHT</name>
<description>Every day at midnight</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>NOON</name>
<description>Every day at noon</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALEVSEL</name>
<description>Calendar Event Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>WEEK</name>
<description>Week change (every Monday at time 00:00:00)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MONTH</name>
<description>Month change (every 01 of each month at time 00:00:00)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>YEAR</name>
<description>Year change (every January 1 at time 00:00:00)</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HRMOD</name>
<description>12-/24-hour Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TIMR</name>
<description>Time Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC</name>
<description>Current Second</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MIN</name>
<description>Current Minute</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUR</name>
<description>Current Hour</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AMPM</name>
<description>Ante Meridiem Post Meridiem Indicator</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CALR</name>
<description>Calendar Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01810720</resetValue>
<fields>
<field>
<name>CENT</name>
<description>Current Century</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>YEAR</name>
<description>Current Year</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MONTH</name>
<description>Current Month</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DAY</name>
<description>Current Day in Current Week</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATE</name>
<description>Current Day in Current Month</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TIMALR</name>
<description>Time Alarm Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC</name>
<description>Second Alarm</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SECEN</name>
<description>Second Alarm Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MIN</name>
<description>Minute Alarm</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MINEN</name>
<description>Minute Alarm Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUR</name>
<description>Hour Alarm</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AMPM</name>
<description>AM/PM Indicator</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUREN</name>
<description>Hour Alarm Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CALALR</name>
<description>Calendar Alarm Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010000</resetValue>
<fields>
<field>
<name>MONTH</name>
<description>Month Alarm</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MTHEN</name>
<description>Month Alarm Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATE</name>
<description>Date Alarm</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATEEN</name>
<description>Date Alarm Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACKUPD</name>
<description>Acknowledge for Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>FREERUN</name>
<description>Time and calendar registers cannot be updated.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Time and calendar registers can be updated.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALARM</name>
<description>Alarm Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_ALARMEVENT</name>
<description>No alarm matching condition occurred.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALARMEVENT</name>
<description>An alarm matching condition has occurred.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SEC</name>
<description>Second Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_SECEVENT</name>
<description>No second event has occurred since the last clear.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SECEVENT</name>
<description>At least one second event has occurred since the last clear.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TIMEV</name>
<description>Time Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_TIMEVENT</name>
<description>No time event has occurred since the last clear.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMEVENT</name>
<description>At least one time event has occurred since the last clear.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALEV</name>
<description>Calendar Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_CALEVENT</name>
<description>No calendar event has occurred since the last clear.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CALEVENT</name>
<description>At least one calendar event has occurred since the last clear.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SCCR</name>
<description>Status Clear Command Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKCLR</name>
<description>Acknowledge Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALRCLR</name>
<description>Alarm Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECCLR</name>
<description>Second Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMCLR</name>
<description>Time Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALCLR</name>
<description>Calendar Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKEN</name>
<description>Acknowledge Update Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALREN</name>
<description>Alarm Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECEN</name>
<description>Second Event Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEN</name>
<description>Time Event Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALEN</name>
<description>Calendar Event Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKDIS</name>
<description>Acknowledge Update Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALRDIS</name>
<description>Alarm Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECDIS</name>
<description>Second Event Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMDIS</name>
<description>Time Event Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALDIS</name>
<description>Calendar Event Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACK</name>
<description>Acknowledge Update Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALR</name>
<description>Alarm Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SEC</name>
<description>Second Event Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIM</name>
<description>Time Event Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CAL</name>
<description>Calendar Event Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>VER</name>
<description>Valid Entry Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NVTIM</name>
<description>Non-valid Time</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVCAL</name>
<description>Non-valid Calendar</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVTIMALR</name>
<description>Non-valid Time Alarm</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVCALALR</name>
<description>Non-valid Calendar Alarm</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>GPBR</name>
<version>6378C</version>
<description>General Purpose Backup Registers</description>
<groupName>SYSC</groupName>
<prependToName>GPBR_</prependToName>
<baseAddress>0x400E1490</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-7</dimIndex>
<name>GPBR[%s]</name>
<description>General Purpose Backup Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>GPBR_VALUE</name>
<description>Value of GPBR x</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
</peripherals>
</device>