83 lines
3.1 KiB
TOML
83 lines
3.1 KiB
TOML
[default.probe]
|
|
# USB vendor ID
|
|
# usb_vid = "1337"
|
|
# USB product ID
|
|
# usb_pid = "1337"
|
|
# Serial number
|
|
# serial = "12345678"
|
|
# The protocol to be used for communicating with the target.
|
|
protocol = "Swd"
|
|
# The speed in kHz of the data link to the target.
|
|
# speed = 1337
|
|
|
|
[default.flashing]
|
|
# Whether or not the target should be flashed.
|
|
enabled = true
|
|
# Whether or not the target should be halted after reset.
|
|
# DEPRECATED, moved to reset section
|
|
halt_afterwards = false
|
|
# Whether or not bytes erased but not rewritten with data from the ELF
|
|
# should be restored with their contents before erasing.
|
|
restore_unwritten_bytes = false
|
|
# The path where an SVG of the assembled flash layout should be written to.
|
|
# flash_layout_output_path = "out.svg"
|
|
# Triggers a full chip erase instead of a page by page erase.
|
|
do_chip_erase = false
|
|
|
|
[default.reset]
|
|
# Whether or not the target should be reset.
|
|
# When flashing is enabled as well, the target will be reset after flashing.
|
|
enabled = true
|
|
# Whether or not the target should be halted after reset.
|
|
halt_afterwards = false
|
|
|
|
[default.general]
|
|
# The chip name of the chip to be debugged.
|
|
chip = "Cortex-M0"
|
|
# A list of chip descriptions to be loaded during runtime.
|
|
chip_descriptions = []
|
|
# The default log level to be used. Possible values are one of:
|
|
# "OFF", "ERROR", "WARN", "INFO", "DEBUG", "TRACE"
|
|
log_level = "WARN"
|
|
# Use this flag to assert the nreset & ntrst pins during attaching the probe to the chip.
|
|
connect_under_reset = false
|
|
|
|
[default.rtt]
|
|
# Whether or not an RTTUI should be opened after flashing.
|
|
enabled = false
|
|
# How the target handles RTT outputs that won't fit in the buffer. This can be
|
|
# overridden per-channel. If left unset, the firmware will determine the default
|
|
# for each RTT up channel.
|
|
# NoBlockSkip - Skip writing the data completely if it doesn't fit in its
|
|
# entirety.
|
|
# NoBlockTrim - Write as much as possible of the data and ignore the rest.
|
|
# BlockIfFull - Spin until the host reads data. Can result in app freezing.
|
|
#
|
|
# up_mode = "BlockIfFull"
|
|
|
|
# A list of channel associations to be displayed. If left empty, all channels are displayed.
|
|
# up, down (Optional) - RTT channel numbers
|
|
# name (Optional) - String to be displayed in the RTTUI tab
|
|
# up_mode (Optional) - RTT channel specific as described above
|
|
# format (Required) - How to interpret data from target firmware. One of:
|
|
# String - Directly show output from the target
|
|
# Defmt - Format output on the host, see https://defmt.ferrous-systems.com/
|
|
# BinaryLE - Display as raw hex
|
|
channels = [
|
|
# { up = 0, down = 0, name = "name", up_mode = "BlockIfFull", format = "Defmt" },
|
|
]
|
|
# The duration in ms for which the logger should retry to attach to RTT.
|
|
timeout = 3000
|
|
# Whether timestamps in the RTTUI are enabled
|
|
show_timestamps = true
|
|
# Whether to save rtt history buffer on exit.
|
|
log_enabled = false
|
|
# Where to save rtt history buffer relative to manifest path.
|
|
log_path = "./logs"
|
|
|
|
[default.gdb]
|
|
# Whether or not a GDB server should be opened after flashing.
|
|
enabled = false
|
|
# The connection string in host:port format wher the GDB server will open a socket.
|
|
gdb_connection_string = "127.0.0.1:1337"
|