[default.probe] # USB vendor ID # usb_vid = "1337" # USB product ID # usb_pid = "1337" # Serial number # serial = "12345678" # The protocol to be used for communicating with the target. protocol = "Swd" # The speed in kHz of the data link to the target. # speed = 1337 [default.flashing] # Whether or not the target should be flashed. enabled = true # Whether or not the target should be halted after reset. # DEPRECATED, moved to reset section halt_afterwards = false # Whether or not bytes erased but not rewritten with data from the ELF # should be restored with their contents before erasing. restore_unwritten_bytes = false # The path where an SVG of the assembled flash layout should be written to. # flash_layout_output_path = "out.svg" # Triggers a full chip erase instead of a page by page erase. do_chip_erase = false [default.reset] # Whether or not the target should be reset. # When flashing is enabled as well, the target will be reset after flashing. enabled = true # Whether or not the target should be halted after reset. halt_afterwards = false [default.general] # The chip name of the chip to be debugged. chip = "STM32F407VGTx" # A list of chip descriptions to be loaded during runtime. chip_descriptions = [] # The default log level to be used. Possible values are one of: # "OFF", "ERROR", "WARN", "INFO", "DEBUG", "TRACE" log_level = "WARN" # Use this flag to assert the nreset & ntrst pins during attaching the probe to the chip. connect_under_reset = false [default.rtt] # Whether or not an RTTUI should be opened after flashing. enabled = false # How the target handles RTT outputs that won't fit in the buffer. This can be # overridden per-channel. If left unset, the firmware will determine the default # for each RTT up channel. # NoBlockSkip - Skip writing the data completely if it doesn't fit in its # entirety. # NoBlockTrim - Write as much as possible of the data and ignore the rest. # BlockIfFull - Spin until the host reads data. Can result in app freezing. # # up_mode = "BlockIfFull" # A list of channel associations to be displayed. If left empty, all channels are displayed. # up, down (Optional) - RTT channel numbers # name (Optional) - String to be displayed in the RTTUI tab # up_mode (Optional) - RTT channel specific as described above # format (Required) - How to interpret data from target firmware. One of: # String - Directly show output from the target # Defmt - Format output on the host, see https://defmt.ferrous-systems.com/ # BinaryLE - Display as raw hex channels = [ # { up = 0, down = 0, name = "name", up_mode = "BlockIfFull", format = "Defmt" }, ] # The duration in ms for which the logger should retry to attach to RTT. timeout = 3000 # Whether timestamps in the RTTUI are enabled show_timestamps = true # Whether to save rtt history buffer on exit. log_enabled = false # Where to save rtt history buffer relative to manifest path. log_path = "./logs" [default.gdb] # Whether or not a GDB server should be opened after flashing. enabled = false # The connection string in host:port format wher the GDB server will open a socket. gdb_connection_string = "127.0.0.1:1337"