play/zephyr/ports/asf/sam3s/include/sam3s2a.h

480 lines
23 KiB
C
Raw Normal View History

2024-02-04 02:38:44 +00:00
/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
#ifndef _SAM3S2A_
#define _SAM3S2A_
/** \addtogroup SAM3S2A_definitions SAM3S2A definitions
This file defines all structures and symbols for SAM3S2A:
- registers and bitfields
- peripheral base address
- peripheral ID
- PIO definitions
*/
/*@{*/
#ifdef __cplusplus
extern "C" {
#endif
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#include <stdint.h>
#endif
/* ************************************************************************** */
/* CMSIS DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_cmsis CMSIS Definitions */
/*@{*/
/**< Interrupt Number Definition */
typedef enum IRQn
{
/****** Cortex-M3 Processor Exceptions Numbers ******************************/
NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */
HardFault_IRQn = -13, /**< 3 HardFault Interrupt */
MemoryManagement_IRQn = -12, /**< 4 Cortex-M3 Memory Management Interrupt */
BusFault_IRQn = -11, /**< 5 Cortex-M3 Bus Fault Interrupt */
UsageFault_IRQn = -10, /**< 6 Cortex-M3 Usage Fault Interrupt */
SVCall_IRQn = -5, /**< 11 Cortex-M3 SV Call Interrupt */
DebugMonitor_IRQn = -4, /**< 12 Cortex-M3 Debug Monitor Interrupt */
PendSV_IRQn = -2, /**< 14 Cortex-M3 Pend SV Interrupt */
SysTick_IRQn = -1, /**< 15 Cortex-M3 System Tick Interrupt */
/****** SAM3S2A specific Interrupt Numbers *********************************/
SUPC_IRQn = 0, /**< 0 SAM3S2A Supply Controller (SUPC) */
RSTC_IRQn = 1, /**< 1 SAM3S2A Reset Controller (RSTC) */
RTC_IRQn = 2, /**< 2 SAM3S2A Real Time Clock (RTC) */
RTT_IRQn = 3, /**< 3 SAM3S2A Real Time Timer (RTT) */
WDT_IRQn = 4, /**< 4 SAM3S2A Watchdog Timer (WDT) */
PMC_IRQn = 5, /**< 5 SAM3S2A Power Management Controller (PMC) */
EFC_IRQn = 6, /**< 6 SAM3S2A Enhanced Embedded Flash Controller (EFC) */
UART0_IRQn = 8, /**< 8 SAM3S2A UART 0 (UART0) */
UART1_IRQn = 9, /**< 9 SAM3S2A UART 1 (UART1) */
PIOA_IRQn = 11, /**< 11 SAM3S2A Parallel I/O Controller A (PIOA) */
PIOB_IRQn = 12, /**< 12 SAM3S2A Parallel I/O Controller B (PIOB) */
USART0_IRQn = 14, /**< 14 SAM3S2A USART 0 (USART0) */
TWI0_IRQn = 19, /**< 19 SAM3S2A Two Wire Interface 0 (TWI0) */
TWI1_IRQn = 20, /**< 20 SAM3S2A Two Wire Interface 1 (TWI1) */
SPI_IRQn = 21, /**< 21 SAM3S2A Serial Peripheral Interface (SPI) */
SSC_IRQn = 22, /**< 22 SAM3S2A Synchronous Serial Controler (SSC) */
TC0_IRQn = 23, /**< 23 SAM3S2A Timer/Counter 0 (TC0) */
TC1_IRQn = 24, /**< 24 SAM3S2A Timer/Counter 1 (TC1) */
TC2_IRQn = 25, /**< 25 SAM3S2A Timer/Counter 2 (TC2) */
ADC_IRQn = 29, /**< 29 SAM3S2A Analog To Digital Converter (ADC) */
DACC_IRQn = 30, /**< 30 SAM3S2A Digital To Analog Converter (DACC) */
PWM_IRQn = 31, /**< 31 SAM3S2A Pulse Width Modulation (PWM) */
CRCCU_IRQn = 32, /**< 32 SAM3S2A CRC Calculation Unit (CRCCU) */
ACC_IRQn = 33, /**< 33 SAM3S2A Analog Comparator (ACC) */
UDP_IRQn = 34, /**< 34 SAM3S2A USB Device Port (UDP) */
PERIPH_COUNT_IRQn = 35 /**< Number of peripheral IDs */
} IRQn_Type;
typedef struct _DeviceVectors
{
/* Stack pointer */
void* pvStack;
/* Cortex-M handlers */
void* pfnReset_Handler;
void* pfnNMI_Handler;
void* pfnHardFault_Handler;
void* pfnMemManage_Handler;
void* pfnBusFault_Handler;
void* pfnUsageFault_Handler;
void* pfnReserved1_Handler;
void* pfnReserved2_Handler;
void* pfnReserved3_Handler;
void* pfnReserved4_Handler;
void* pfnSVC_Handler;
void* pfnDebugMon_Handler;
void* pfnReserved5_Handler;
void* pfnPendSV_Handler;
void* pfnSysTick_Handler;
/* Peripheral handlers */
void* pfnSUPC_Handler; /* 0 Supply Controller */
void* pfnRSTC_Handler; /* 1 Reset Controller */
void* pfnRTC_Handler; /* 2 Real Time Clock */
void* pfnRTT_Handler; /* 3 Real Time Timer */
void* pfnWDT_Handler; /* 4 Watchdog Timer */
void* pfnPMC_Handler; /* 5 Power Management Controller */
void* pfnEFC_Handler; /* 6 Enhanced Embedded Flash Controller */
void* pvReserved7;
void* pfnUART0_Handler; /* 8 UART 0 */
void* pfnUART1_Handler; /* 9 UART 1 */
void* pvReserved10;
void* pfnPIOA_Handler; /* 11 Parallel I/O Controller A */
void* pfnPIOB_Handler; /* 12 Parallel I/O Controller B */
void* pvReserved13;
void* pfnUSART0_Handler; /* 14 USART 0 */
void* pvReserved15;
void* pvReserved16;
void* pvReserved17;
void* pvReserved18;
void* pfnTWI0_Handler; /* 19 Two Wire Interface 0 */
void* pfnTWI1_Handler; /* 20 Two Wire Interface 1 */
void* pfnSPI_Handler; /* 21 Serial Peripheral Interface */
void* pfnSSC_Handler; /* 22 Synchronous Serial Controler */
void* pfnTC0_Handler; /* 23 Timer/Counter 0 */
void* pfnTC1_Handler; /* 24 Timer/Counter 1 */
void* pfnTC2_Handler; /* 25 Timer/Counter 2 */
void* pvReserved26;
void* pvReserved27;
void* pvReserved28;
void* pfnADC_Handler; /* 29 Analog To Digital Converter */
void* pfnDACC_Handler; /* 30 Digital To Analog Converter */
void* pfnPWM_Handler; /* 31 Pulse Width Modulation */
void* pfnCRCCU_Handler; /* 32 CRC Calculation Unit */
void* pfnACC_Handler; /* 33 Analog Comparator */
void* pfnUDP_Handler; /* 34 USB Device Port */
} DeviceVectors;
/* Cortex-M3 core handlers */
void Reset_Handler ( void );
void NMI_Handler ( void );
void HardFault_Handler ( void );
void MemManage_Handler ( void );
void BusFault_Handler ( void );
void UsageFault_Handler ( void );
void SVC_Handler ( void );
void DebugMon_Handler ( void );
void PendSV_Handler ( void );
void SysTick_Handler ( void );
/* Peripherals handlers */
void ACC_Handler ( void );
void ADC_Handler ( void );
void CRCCU_Handler ( void );
void DACC_Handler ( void );
void EFC_Handler ( void );
void PIOA_Handler ( void );
void PIOB_Handler ( void );
void PMC_Handler ( void );
void PWM_Handler ( void );
void RSTC_Handler ( void );
void RTC_Handler ( void );
void RTT_Handler ( void );
void SPI_Handler ( void );
void SSC_Handler ( void );
void SUPC_Handler ( void );
void TC0_Handler ( void );
void TC1_Handler ( void );
void TC2_Handler ( void );
void TWI0_Handler ( void );
void TWI1_Handler ( void );
void UART0_Handler ( void );
void UART1_Handler ( void );
void UDP_Handler ( void );
void USART0_Handler ( void );
void WDT_Handler ( void );
/**
* \brief Configuration of the Cortex-M3 Processor and Core Peripherals
*/
#define __CM3_REV 0x0200 /**< SAM3S2A core revision number ([15:8] revision number, [7:0] patch number) */
#define __MPU_PRESENT 1 /**< SAM3S2A does provide a MPU */
#define __NVIC_PRIO_BITS 4 /**< SAM3S2A uses 4 Bits for the Priority Levels */
#define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */
/*
* \brief CMSIS includes
*/
#include <core_cm3.h>
#if !defined DONT_USE_CMSIS_INIT
#include "system_sam3s.h"
#endif /* DONT_USE_CMSIS_INIT */
/*@}*/
/* ************************************************************************** */
/** SOFTWARE PERIPHERAL API DEFINITION FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_api Peripheral Software API */
/*@{*/
#include "component/acc.h"
#include "component/adc.h"
#include "component/chipid.h"
#include "component/crccu.h"
#include "component/dacc.h"
#include "component/efc.h"
#include "component/gpbr.h"
#include "component/matrix.h"
#include "component/pdc.h"
#include "component/pio.h"
#include "component/pmc.h"
#include "component/pwm.h"
#include "component/rstc.h"
#include "component/rtc.h"
#include "component/rtt.h"
#include "component/spi.h"
#include "component/ssc.h"
#include "component/supc.h"
#include "component/tc.h"
#include "component/twi.h"
#include "component/uart.h"
#include "component/udp.h"
#include "component/usart.h"
#include "component/wdt.h"
/*@}*/
/* ************************************************************************** */
/* REGISTER ACCESS DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_reg Registers Access Definitions */
/*@{*/
#include "instance/ssc.h"
#include "instance/spi.h"
#include "instance/tc0.h"
#include "instance/twi0.h"
#include "instance/twi1.h"
#include "instance/pwm.h"
#include "instance/usart0.h"
#include "instance/udp.h"
#include "instance/adc.h"
#include "instance/dacc.h"
#include "instance/acc.h"
#include "instance/crccu.h"
#include "instance/matrix.h"
#include "instance/pmc.h"
#include "instance/uart0.h"
#include "instance/chipid.h"
#include "instance/uart1.h"
#include "instance/efc.h"
#include "instance/pioa.h"
#include "instance/piob.h"
#include "instance/rstc.h"
#include "instance/supc.h"
#include "instance/rtt.h"
#include "instance/wdt.h"
#include "instance/rtc.h"
#include "instance/gpbr.h"
/*@}*/
/* ************************************************************************** */
/* PERIPHERAL ID DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_id Peripheral Ids Definitions */
/*@{*/
#define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */
#define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */
#define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */
#define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */
#define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */
#define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */
#define ID_EFC ( 6) /**< \brief Enhanced Embedded Flash Controller (EFC) */
#define ID_UART0 ( 8) /**< \brief UART 0 (UART0) */
#define ID_UART1 ( 9) /**< \brief UART 1 (UART1) */
#define ID_PIOA (11) /**< \brief Parallel I/O Controller A (PIOA) */
#define ID_PIOB (12) /**< \brief Parallel I/O Controller B (PIOB) */
#define ID_USART0 (14) /**< \brief USART 0 (USART0) */
#define ID_TWI0 (19) /**< \brief Two Wire Interface 0 (TWI0) */
#define ID_TWI1 (20) /**< \brief Two Wire Interface 1 (TWI1) */
#define ID_SPI (21) /**< \brief Serial Peripheral Interface (SPI) */
#define ID_SSC (22) /**< \brief Synchronous Serial Controler (SSC) */
#define ID_TC0 (23) /**< \brief Timer/Counter 0 (TC0) */
#define ID_TC1 (24) /**< \brief Timer/Counter 1 (TC1) */
#define ID_TC2 (25) /**< \brief Timer/Counter 2 (TC2) */
#define ID_ADC (29) /**< \brief Analog To Digital Converter (ADC) */
#define ID_DACC (30) /**< \brief Digital To Analog Converter (DACC) */
#define ID_PWM (31) /**< \brief Pulse Width Modulation (PWM) */
#define ID_CRCCU (32) /**< \brief CRC Calculation Unit (CRCCU) */
#define ID_ACC (33) /**< \brief Analog Comparator (ACC) */
#define ID_UDP (34) /**< \brief USB Device Port (UDP) */
#define ID_PERIPH_COUNT (35) /**< \brief Number of peripheral IDs */
/*@}*/
/* ************************************************************************** */
/* BASE ADDRESS DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_base Peripheral Base Address Definitions */
/*@{*/
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define SSC (0x40004000U) /**< \brief (SSC ) Base Address */
#define PDC_SSC (0x40004100U) /**< \brief (PDC_SSC ) Base Address */
#define SPI (0x40008000U) /**< \brief (SPI ) Base Address */
#define PDC_SPI (0x40008100U) /**< \brief (PDC_SPI ) Base Address */
#define TC0 (0x40010000U) /**< \brief (TC0 ) Base Address */
#define TWI0 (0x40018000U) /**< \brief (TWI0 ) Base Address */
#define PDC_TWI0 (0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */
#define TWI1 (0x4001C000U) /**< \brief (TWI1 ) Base Address */
#define PDC_TWI1 (0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */
#define PWM (0x40020000U) /**< \brief (PWM ) Base Address */
#define PDC_PWM (0x40020100U) /**< \brief (PDC_PWM ) Base Address */
#define USART0 (0x40024000U) /**< \brief (USART0 ) Base Address */
#define PDC_USART0 (0x40024100U) /**< \brief (PDC_USART0) Base Address */
#define UDP (0x40034000U) /**< \brief (UDP ) Base Address */
#define ADC (0x40038000U) /**< \brief (ADC ) Base Address */
#define PDC_ADC (0x40038100U) /**< \brief (PDC_ADC ) Base Address */
#define DACC (0x4003C000U) /**< \brief (DACC ) Base Address */
#define PDC_DACC (0x4003C100U) /**< \brief (PDC_DACC ) Base Address */
#define ACC (0x40040000U) /**< \brief (ACC ) Base Address */
#define CRCCU (0x40044000U) /**< \brief (CRCCU ) Base Address */
#define MATRIX (0x400E0200U) /**< \brief (MATRIX ) Base Address */
#define PMC (0x400E0400U) /**< \brief (PMC ) Base Address */
#define UART0 (0x400E0600U) /**< \brief (UART0 ) Base Address */
#define PDC_UART0 (0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */
#define CHIPID (0x400E0740U) /**< \brief (CHIPID ) Base Address */
#define UART1 (0x400E0800U) /**< \brief (UART1 ) Base Address */
#define PDC_UART1 (0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */
#define EFC (0x400E0A00U) /**< \brief (EFC ) Base Address */
#define PIOA (0x400E0E00U) /**< \brief (PIOA ) Base Address */
#define PDC_PIOA (0x400E0F00U) /**< \brief (PDC_PIOA ) Base Address */
#define PIOB (0x400E1000U) /**< \brief (PIOB ) Base Address */
#define RSTC (0x400E1400U) /**< \brief (RSTC ) Base Address */
#define SUPC (0x400E1410U) /**< \brief (SUPC ) Base Address */
#define RTT (0x400E1430U) /**< \brief (RTT ) Base Address */
#define WDT (0x400E1450U) /**< \brief (WDT ) Base Address */
#define RTC (0x400E1460U) /**< \brief (RTC ) Base Address */
#define GPBR (0x400E1490U) /**< \brief (GPBR ) Base Address */
#else
#define SSC ((Ssc *)0x40004000U) /**< \brief (SSC ) Base Address */
#define PDC_SSC ((Pdc *)0x40004100U) /**< \brief (PDC_SSC ) Base Address */
#define SPI ((Spi *)0x40008000U) /**< \brief (SPI ) Base Address */
#define PDC_SPI ((Pdc *)0x40008100U) /**< \brief (PDC_SPI ) Base Address */
#define TC0 ((Tc *)0x40010000U) /**< \brief (TC0 ) Base Address */
#define TWI0 ((Twi *)0x40018000U) /**< \brief (TWI0 ) Base Address */
#define PDC_TWI0 ((Pdc *)0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */
#define TWI1 ((Twi *)0x4001C000U) /**< \brief (TWI1 ) Base Address */
#define PDC_TWI1 ((Pdc *)0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */
#define PWM ((Pwm *)0x40020000U) /**< \brief (PWM ) Base Address */
#define PDC_PWM ((Pdc *)0x40020100U) /**< \brief (PDC_PWM ) Base Address */
#define USART0 ((Usart *)0x40024000U) /**< \brief (USART0 ) Base Address */
#define PDC_USART0 ((Pdc *)0x40024100U) /**< \brief (PDC_USART0) Base Address */
#define UDP ((Udp *)0x40034000U) /**< \brief (UDP ) Base Address */
#define ADC ((Adc *)0x40038000U) /**< \brief (ADC ) Base Address */
#define PDC_ADC ((Pdc *)0x40038100U) /**< \brief (PDC_ADC ) Base Address */
#define DACC ((Dacc *)0x4003C000U) /**< \brief (DACC ) Base Address */
#define PDC_DACC ((Pdc *)0x4003C100U) /**< \brief (PDC_DACC ) Base Address */
#define ACC ((Acc *)0x40040000U) /**< \brief (ACC ) Base Address */
#define CRCCU ((Crccu *)0x40044000U) /**< \brief (CRCCU ) Base Address */
#define MATRIX ((Matrix *)0x400E0200U) /**< \brief (MATRIX ) Base Address */
#define PMC ((Pmc *)0x400E0400U) /**< \brief (PMC ) Base Address */
#define UART0 ((Uart *)0x400E0600U) /**< \brief (UART0 ) Base Address */
#define PDC_UART0 ((Pdc *)0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */
#define CHIPID ((Chipid *)0x400E0740U) /**< \brief (CHIPID ) Base Address */
#define UART1 ((Uart *)0x400E0800U) /**< \brief (UART1 ) Base Address */
#define PDC_UART1 ((Pdc *)0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */
#define EFC ((Efc *)0x400E0A00U) /**< \brief (EFC ) Base Address */
#define PIOA ((Pio *)0x400E0E00U) /**< \brief (PIOA ) Base Address */
#define PDC_PIOA ((Pdc *)0x400E0F00U) /**< \brief (PDC_PIOA ) Base Address */
#define PIOB ((Pio *)0x400E1000U) /**< \brief (PIOB ) Base Address */
#define RSTC ((Rstc *)0x400E1400U) /**< \brief (RSTC ) Base Address */
#define SUPC ((Supc *)0x400E1410U) /**< \brief (SUPC ) Base Address */
#define RTT ((Rtt *)0x400E1430U) /**< \brief (RTT ) Base Address */
#define WDT ((Wdt *)0x400E1450U) /**< \brief (WDT ) Base Address */
#define RTC ((Rtc *)0x400E1460U) /**< \brief (RTC ) Base Address */
#define GPBR ((Gpbr *)0x400E1490U) /**< \brief (GPBR ) Base Address */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
/* ************************************************************************** */
/* PIO DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/** \addtogroup SAM3S2A_pio Peripheral Pio Definitions */
/*@{*/
#include "pio/sam3s2a.h"
/*@}*/
/* ************************************************************************** */
/* MEMORY MAPPING DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
#define IFLASH_SIZE (0x20000u)
#define IFLASH_PAGE_SIZE (256u)
#define IFLASH_LOCK_REGION_SIZE (16384u)
#define IFLASH_NB_OF_PAGES (512u)
#define IFLASH_NB_OF_LOCK_BITS (8u)
#define IRAM_SIZE (0x8000u)
#define IFLASH_ADDR (0x00400000u) /**< Internal Flash base address */
#define IROM_ADDR (0x00800000u) /**< Internal ROM base address */
#define IRAM_ADDR (0x20000000u) /**< Internal RAM base address */
#define EBI_CS0_ADDR (0x60000000u) /**< EBI Chip Select 0 base address */
#define EBI_CS1_ADDR (0x61000000u) /**< EBI Chip Select 1 base address */
#define EBI_CS2_ADDR (0x62000000u) /**< EBI Chip Select 2 base address */
#define EBI_CS3_ADDR (0x63000000u) /**< EBI Chip Select 3 base address */
/* ************************************************************************** */
/* MISCELLANEOUS DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
#define CHIP_JTAGID (0x05B2D03FUL)
#define CHIP_CIDR (0x288A0760UL)
#define CHIP_EXID (0x0UL)
#define NB_CH_ADC (8UL)
#define NB_CH_DAC (0UL)
/* ************************************************************************** */
/* ELECTRICAL DEFINITIONS FOR SAM3S2A */
/* ************************************************************************** */
/* Device characteristics */
#define CHIP_FREQ_SLCK_RC_MIN (20000UL)
#define CHIP_FREQ_SLCK_RC (32000UL)
#define CHIP_FREQ_SLCK_RC_MAX (44000UL)
#define CHIP_FREQ_MAINCK_RC_4MHZ (4000000UL)
#define CHIP_FREQ_MAINCK_RC_8MHZ (8000000UL)
#define CHIP_FREQ_MAINCK_RC_12MHZ (12000000UL)
#define CHIP_FREQ_CPU_MAX (64000000UL)
#define CHIP_FREQ_XTAL_32K (32768UL)
#define CHIP_FREQ_XTAL_12M (12000000UL)
/* Embedded Flash Write Wait State */
#define CHIP_FLASH_WRITE_WAIT_STATE (4U)
/* Embedded Flash Read Wait State (VDDCORE set at 1.65V) */
#define CHIP_FREQ_FWS_0 (17000000UL) /**< \brief Maximum operating frequency when FWS is 0 */
#define CHIP_FREQ_FWS_1 (30000000UL) /**< \brief Maximum operating frequency when FWS is 1 */
#define CHIP_FREQ_FWS_2 (54000000UL) /**< \brief Maximum operating frequency when FWS is 2 */
#define CHIP_FREQ_FWS_3 (64000000UL) /**< \brief Maximum operating frequency when FWS is 3 */
/* HYSTeresis levels: please refer to Electrical Characteristics */
#define ACC_ACR_HYST_50MV_MAX (0x01UL)
#define ACC_ACR_HYST_90MV_MAX (0x11UL)
#ifdef __cplusplus
}
#endif
/*@}*/
#endif /* _SAM3S2A_ */