minico2-firmware/boards/xtensa/minico2/minico2.dts

113 lines
2.2 KiB
Plaintext
Raw Normal View History

2023-11-19 05:33:59 +00:00
/dts-v1/;
#include <espressif/esp32/esp32_wroom_32ue_n4.dtsi>
#include "minico2-pinctrl.dtsi"
/ {
model = "MiniCO2 Revision 0";
compatible = "espressif,esp32";
chosen {
zephyr,sram = &sram0;
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,flash = &flash0;
zephyr,display = &epd;
2023-11-19 05:33:59 +00:00
};
};
&cpu0 {
clock-frequency = <ESP32_CLK_CPU_240M>;
};
&cpu1 {
clock-frequency = <ESP32_CLK_CPU_240M>;
};
&uart0 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-names = "default";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <I2C_BITRATE_STANDARD>;
sda-gpios = <&gpio0 32 GPIO_OPEN_DRAIN>;
scl-gpios = <&gpio0 33 GPIO_OPEN_DRAIN>;
pinctrl-0 = <&i2c0_default>;
pinctrl-names = "default";
};
&spi2 {
status = "okay";
pinctrl-0 = <&spi2_default>;
pinctrl-names = "default";
cs-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
epd: sd16xxfb@0 {
compatible = "gooddisplay,gdey0213b74", "solomon,ssd1680";
spi-max-frequency = <4000000>;
reg = <0>;
width = <250>;
height = <122>;
dc-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
busy-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
};
};
&trng0 {
status = "okay";
};
2023-11-19 05:33:59 +00:00
/* Stolen from an Espressif devkit's dts, thanks Espressif */
&flash0 {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* Reserve 60kB for the bootloader */
boot_partition: partition@1000 {
label = "mcuboot";
reg = <0x00001000 0x0000F000>;
read-only;
};
/* Reserve 1024kB for the application in slot 0 */
slot0_partition: partition@10000 {
label = "image-0";
reg = <0x00010000 0x00100000>;
};
/* Reserve 1024kB for the application in slot 1 */
slot1_partition: partition@110000 {
label = "image-1";
reg = <0x00110000 0x00100000>;
};
/* Reserve 256kB for the scratch partition */
scratch_partition: partition@210000 {
label = "image-scratch";
reg = <0x00210000 0x00040000>;
};
storage_partition: partition@250000 {
label = "storage";
reg = <0x00250000 0x00006000>;
};
};
};