While you'll mostly see entries as a terse error message on one line, every time you send a message journald collects and stores a lot more information.
For example, here's an error from my audio server, [pipewire](https://pipewire.org/). Note that some fields are reordered from the raw journalctl output
context about what exact process failed and what state it was in during that failure. Unfortunately the [official descriptions](https://www.freedesktop.org/software/systemd/man/systemd.journal-fields.html) of what these fields mean can be a bit obtuse.
While working on my prototype for a system-journald replacement, [rjournald](https://github.com/artemist/rjournald) I've discovered what many of these mean through context or reading the systemd code. You can categorize these into one of a few types
### System context
These fields help you figure out if the error is coming from this computer, OS install, or boot.
- **_BOOT_ID** is a unique ID (UUID in this case) generated at every startup. The kernel creates it and you can access the current one at `/proc/sys/kernel/random/boot_id`. I've found it useful to help figure out if I've rebooted my system since an error occurred.
- **_MACHINE_ID** is a unique ID to the system which you can find in `/etc/machine-id`. This should be set on the first boot of your system by systemd and helps you figure out if the logs could be from before a system was reinstalled.
- **_HOSTNAME** is the name of the system. You probably set this in install. There's a few places to get this but journald uses `/proc/sys/kernel/hostname` (what the kernel thinks your hostname is). You can also get the hostname from systemd-hostnamed (which lets you set non-ascii hostnames for some programs) or `/etc/hostname` (which is where systemd will read your hostname and tell it to the kernel), but these might be different.
### Process permissions
These help you understand what kind of access a process has. You might get errors if a process has insufficient permission or runs as the wrong user
- **_UID** tells you what user executed the process, as seen by journald. You can get this for your user with the command `id`.
- **_GID** tells you which group the process was using, as seen by journald. While a user can have several groups, a process executes under one primary group ID
- **_CAP_EFFECTIVE** provides what [capabilities](https://linux.die.net/man/7/capabilities) a process can use. Capabilities give fine-grained privileged access to processes without requiring them to be the root user. For example, binding to port 80 or 443 requires the CAP_NET_BIND_SERVICE capability. If _CAP_EFFECTIVE=0 then you know you've missed that capability.
- **_SELINUX_CONTEXT** is an additional set of permissions when using the [SELinux LSM](https://www.redhat.com/en/topics/linux/what-is-selinux) (Linux Security Module). I don't use SELinux on this sytem so it just shows up as "kernel", meaning SELinux will not limit permissions. Fedora, CentOS, and RHEL use SELinux by default.
If you're using journald you're almost certainly using systemd to start all your processes. Systemd organizes processes into "units", such as OS services and user sessions, and "slices", a set of similar units.
System units are started and organized by PID 1, the first program executed by the Linux kernel when you startup, while user units are organized by another instance of systemd running as your user, started by PID 1 when you login.
These are represented to the rest of the OS as a hierarchical set of "cgroups" which allow systemd to set maximum resources for units and slices (e.g. make it so users can only use 1GB of RAM at a time).
- **_SYSTEMD_CGROUP** is the full cgroup path of the process. As it's hierarchical setting a limit for e.g. `user.slice` would make it so all users together cannot go above the limit. While this is the only option you really need (systemd-journald parses the slices and units from the path it retrieves from `/proc/[pid]/cgroup`) others are included for convenience .
- **_SYSTEMD_SLICE** is the deepest slice that the PID 1 systemd assigns to the process. In this example journald chooses to say `user-1000.slice` even though the process is also in `user.slice`. Note that there is a special case for systemd: its full cgroup path is `/init.scope` but journald claims it's in the special slice `-.slice`.
- **_SYSTEMD_UNIT** is the unit that PID 1 systemd assigns to this process. For a system service this would probably be something like `dbus.service`.
- **_SYSTEMD_USER_SLICE** and **_SYSTEMD_USER_UNIT** are similar to the same fields without USER, but assigned by the user systemd
- **_PID** is the process ID (a numeric ID from 1 to 4194304) as seen by journald. PIDs are not unique over a system boot but should not be reused at the same time.
- **_EXE** is the location of the executable. This is the result of canonicalizing the symlinks at executable start (i.e. if originally a → b → c, you execute a, then a → b → d, then `_EXE` will still contain a). On your system this will probably end up being something in `/usr/bin` but I use [NixOS](https://nixos.org/) which uses extremely long executable path names.
- **_CMDLINE** is the full command with arguments as you might see in `char **argv`. Note that a program can change this. The most high-profile example I've seen of this is nginx, where you will see logs from `nginx: worker process`.
- **_COMM** is the command name. This will normally be the final part of the path in `_EXE` but can be different, especially when running programs like [busybox](https://www.busybox.net/) where multiple programs are in file. This is also the pthread name of the sending thread. For example when logging from Firefox this might be `Web Content`.
Time, as it turns out, is extremely complicated. You'll get 3 separate time fields. Two of them are the "wall clock" time in unix time (nominally microseconds since midnight at the beginning of 1 January 1970 UTC, though leap seconds make this a bit more complicated). Unfortunately, wall clock time can jump forwards or backwards if your computer's clock is too slow or fast, respectively. Therefore, systemd also includes the "monotonic time", a number of seconds since some point in the past. This is guaranteed to always move forward so this is what you'll want to discern ordering.
Unfortunately wall clock time is also more complicated than you might expect. Linux has 4 separate monotonic timers:
- **CLOCK_MONOTONIC_RAW** counts the amount of time that Linux has spent not asleep since last boot.
- **CLOCK_MONOTONIC** is similar but will also include incremental adjustments from your time synchronization daemon noticing a fast or slow clock and reporting it to the kernel with [adjtime](https://linux.die.net/man/3/adjtime). The adjustments happen over a long period by speeding up or slowing the clock.
- **CLOCK_BOOTTIME** is similar to CLOCK_MONOTONIC but also counts time where they system is asleep.
- **CLOCK_MONOTONIC_COARSE** is similar to CLOCK_MONOTONIC but requires slightly less work in the Kernel and is less accurate. This isn't particularly useful for our use case
- **_SOURCE_REALTIME_TIMESTAMP** is the UTC timestamp collected as soon as journald receives the message
- **__REALTIME_TIMESTAMP** is the UTC timestamp collected when message is written into the journal file. It takes a bit of time for journald to read all the context data out of /proc so this is a bit later.
- **__MONOTONIC_TIMESTAMP** is the monotonic timestamp from when the message is written into the journal file. Journald uses CLOCK_MONOTONIC but there's not much of a specification to tell people implementing it which one to use.
### Reader context
Fields starting with two underscores are generated by `journalctl` while reading.
### The actual message
Finally there's the untrusted message sent by the process.
- **MESSAGE** is the only required field and is what shows up in `journalctl` when you don't use `-o export`.
- Some programs also send where the error comes from with **CODE_FILE**, **CODE_LINE**, and **CODE_FUNC**
- **SYSLOG_IDENTIFIER** is the program identifier and is what you would get as the program source if you were using syslogd (as you would before systemd)
Linux has the concept of a "namespace" mostly seen with containers which allows different processes to see the system differently. A few types make things interesting when logging to a journald outside the namespace (e.g. if you pass through the host journald socket to a container)
- **PID** namespaces allow different processes to see a different list of processes. For example, I'm currently running a container to run games on my laptop. If I list processes in the container I only see 34 while there are 472 running on my system overall. Additionally, within a PID namespace PIDs will be remapped. My games container is running systemd at PID 1 but that same process appears to the rest of my system as PID 2454372. The Linux kernel remaps PIDs to make sense in the receiver's PID namespace when sending the sender's credentials, so journald will record the PID as seen from the host if you pass it through to a container.
- **User** namespaces remap user and group IDs. This can be useful so that Linux doesn't assume everything running as root in your container has full root permissions on the the host with respect to e.g. loading kernel modules. When you make a user namespace you specify a UID map for reading and setting UIDs. For example, I use UID 1000000 instead of UID 0 in my games container. Journald will see the PID and GID as seen from the host namespace
- **Mount**
- **UTS** namespaces allow programs to see a different hostname. Journald deals with these by not caring. Journald sets the `_HOSTNAME` field by asking for the hostname from the OS once then caching it. Messages from containers will show up in the log as using the hostname where journald receives it.
Journald can get messages from one of 6 separate sources: **journal** (using the native journald protocol), **stdout** (a process's standard output or error redirected to systemd), **syslog** (the legacy linux logging system), **kernel** (kernel messages you can get through the `dmesg` command), **audit** (logs the kernel generates about programs' activities), and **driver** (error messages from within journald). Each has their own peculiarities from both the journald side and the client side but I'll mostly be talking about journald, stdout, and syslog.
